Read Sharp VC-MH731HM (serv.man10) User Guide / Operation Manual online
12
BASIC OPERATION
IMMEDIATE RECORDING
NOTES:
●
If the tape ends before the recording is complete the VCR will stop recording and
rewind, or eject if the VCR is in timer record mode.
rewind, or eject if the VCR is in timer record mode.
●
If the VCR ejects the video tape when you press RECORD (
) the tape is record
protected. i.e. record protection tab has been removed.
You can record the channel you are watching or a different channel.
1. Insert a video tape into your VCR.
2.Select the channel you wish to record on the VCR.
3. To start recording, press RECORD (
).
4.To pause during recording, press PAUSE/STILL (
).
5.To continue recording, press RECORD (
).
6.To stop recording, press STOP once.
SIMPLE TIMED RECORDING:
1. To specify a stop time, press RECORD (
1. To specify a stop time, press RECORD (
).
2. Each additional press of RECORD (
)
will delay the stop time by 10 minutes.
3. To stop recording at any time, press
STOP (
) once.
S T O P
1 5 : 3 0
SELECTION OF A CHANNEL
Select the channel by using the number buttons on the remote control, or select the
next/previous channel by pressing CHANNEL
Select the channel by using the number buttons on the remote control, or select the
next/previous channel by pressing CHANNEL
or
.
To change between single digit and 2-digit channel numbers, press
.
For example, for channel 24, press
then press 2 4.
vc-m331/mh731hm 3/2/99 1:34 pm Page 16
Click on the first or last page to see other VC-MH731HM (serv.man10) service manuals if exist.