Read Sharp VC-ME80HM (serv.man7) User Guide / Operation Manual online
34
ADVANCED OPERATION
VCR CODE
This feature allows two Sharp VCRs to be controlled independently of each other, by one
remote control.
1.Press MENU to enter the main menu.
2.Select MODE using the [
] buttons and press SET.
3.Select VCR CODE using the [
] buttons and the [
] buttons to select 1 or 2.
/
/
/
4.Press SET to confirm selection.
5.Press and hold either the 1 or 2 number buttons and the VCR CODE button on the remote
control together for 5 seconds.
NOTE:
●
If the second VCR does not have this feature then it is factory set as VCR CODE 1,
therefore the VC-ME80 should be set to VCR CODE 2.
therefore the VC-ME80 should be set to VCR CODE 2.
NOTES:
●
The remote control code can be changed at anytime to enable operation of a second
VCR.
VCR.
●
If the remote is incorrect for the VC-ME80, the VCR display will flash up the code
number that has been selected for the VCR.
number that has been selected for the VCR.
●
The VCR can still be operated by the buttons on the control panel regardless of the VCR
CODE setting.
CODE setting.
ME-80 HM 7/12/98 12:16 pm Page 34
Click on the first or last page to see other VC-ME80HM (serv.man7) service manuals if exist.