Read Sharp VC-ME80HM (serv.man7) User Guide / Operation Manual online
35
NOTES:
●
Recordings must be longer than 3 minutes.
●
The starting point of playback may vary.
●
This feature will only work with video tapes recorded on a VCR with the DPSS feature.
4.To cancel the search before it has finished, press STOP (
) or PLAY/X2 (
).
-1
+1
+2
+3
RECORDING 5
RECORDING 4
RECORDING 3
RECORDING 2
RECORDING 1
DPSS
number
number
DPSS Signals
Current tape position
Rewind
Fast Forward
ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
DIGITAL PROGRAMME SEARCH SYSTEM (DPSS)
Your VCR records a marker signal on the tape at the start of each recording. These signals
can be used later to locate the starting point of a recording.
can be used later to locate the starting point of a recording.
Press DPSS
to locate a previous programme or the next programme.
For example,
1.Load the video tape into the VCR
2.Press DPSS
1.Load the video tape into the VCR
2.Press DPSS
three times. A 3 will appear on the on-screen display, and the VCR will
fast forward to locate the third recording after the current one.
3.Press DPSS once. A -1 will appear on the on-screen display and the VCR will rewind
to locate the beginning of the current recording.
/
1 press = 30 seconds.
2 presses = 1 minute.
3 presses = 1 minute 30 seconds.
4 presses = 2 minutes.
2 presses = 1 minute.
3 presses = 1 minute 30 seconds.
4 presses = 2 minutes.
2.Press SKIP SEARCH on the remote
control. The number of times you press
SKIP SEARCH determines the forward
search time.
SKIP SEARCH determines the forward
search time.
●
After searching, normal playback will
resume automatically.
resume automatically.
SKIP SEARCHING THE VIDEO TAPE
You can search the tape in 30 second time intervals. To do this follow the procedure below:
1.Press PLAY/X2 (
) to start the video tape playing.
ME-80 HM 7/12/98 12:16 pm Page 35
Click on the first or last page to see other VC-ME80HM (serv.man7) service manuals if exist.