Read Sharp TU-X1E (serv.man6) Service Manual online
TU-X1E/RU
5 – 5
6. Video signal adjustment procedure
* The adjustment process mode menu is listed in Section 4
4.
Signal generator level adjustment check (Adjustment to the specified level)
䊶Composite signal PAL/SECAM
䊶Composite signal PAL/SECAM
: 0.7Vp-p
㫧 0.02Vp-p (Pedestal to white level)
䊶RGB signal
: 0.7Vp-p
㫧 0.02Vp-p
䊶15K component signal (50 Hz)
: Y level
: 0.7Vp-p
㫧 0.02Vp-p (Pedestal to white level)
: PB, PR level : 0.7Vp-p
㫧 0.02Vp-p
䊶33K component signal (50 Hz)
: Y level
: 0.7Vp-p
㫧 0.02Vp-p (Pedestal to white level)
: PB, PR level : 0.7Vp-p
㫧 0.02Vp-p
䊶DVI (ANALOG RGB) signal
: RGB level)
: 0.7Vp-p
㫧 0.02Vp-p
1. Entering the adjustment process mode
Enter the adjustment process mode according to Section 2
2.
2. PAL signal adjustment
1
Setting
[Signal]
䊶㩷Feed the PAL full field colour bar signal
(75% colour saturation) to EXT1 SCART VIDEO IN.
CART
PAL Full field colour bar
[VIDEO input signal]
[Terminal]
EXT1 SCART VIDEO IN
100% white
Black
2
Auto adjustment
Adjustment process
Bring the cursor on [PAL ADJ] and press [OK].
performance
[PAL MAIN] menu
[PAL ADJ OK] appears when finished.
page 4/16
* ATTENTION : Please execute (4) TUNER adjustment afterwards if you adjust PAL signal of (2) after all adjustments are completed.
3. TUNER adjustment
1
Setting
[Signal]
䊶 Feed th e PAL Sprit field colour bar signal (E-12c h) t o TUNER.
PAL sprit field colour Bar
RF signal UV
RF signal UV
[E-12CH]
[Terminal]
TUNER
TUNER
㸡100% white
2
Auto adjustment
Adjustment process
Bring the cursor on [TUNER ADJ] and press [OK]
performance
[TUNER ADJ] menu
[TUNER ADJ OK] appears when finished.
page 3/16
4. SECAM adjustment
1
Setting
[Signal]
䊶㩷Feed the SECAM full field colour bar signal
SECAM
(75% colour saturation) to EXT1 SCART IN.
Full field colour Bar
[VIDEO input signal]
[Terminal]
EXT1 SCART IN
100% white
Black
2
Auto adjustment
Adjustment process
Bring the cursor on [SECAM ADJ] and press [OK].
performance
[PAL MAIN] menu
[SECAM ADJ OK] appears when finished.
page 4/16
Adjustment procedure
Adjustment point
Adjustment conditions
Adjustment procedure
Adjustment point
Adjustment conditions
Adjustment point
Adjustment Conditions
Adjustment
㵘procedure
Adjustment procedure
䊶 The pict ure level and the synchronous level of t he PAL color bar
pattern (E-12CH) should be 7:3.
Adjustment point
Adjustment conditions
Click on the first or last page to see other TU-X1E (serv.man6) service manuals if exist.