Read Sharp LC-M3700 (serv.man7) Service Manual online
23
LC-M3700
LC-M3710
LC-M3710
2. Analog adjustment
1) N358 white balance adjustment
1) N358 white balance adjustment
Adjustment item
Adjustment condition
Adjusting method
Signal input
Using a signal generator, feed NTSC signal window
patterns (in-window 20IRE) to the video input
terminal of INPUT1.
patterns (in-window 20IRE) to the video input
terminal of INPUT1.
After performing steps 1 to 3 and 6 to 8, repeat adjustment so that the color becomes brightest for both 20IRE and 80IRE.
20IRE
1
Setting
2
R CUTOFF adjustment
Page7
N358 R CUTOFF
N358 R CUTOFF
1. On the R CUTOFF item, press the ENTER key to
display the special gamma.
2. Adjust the value so that the color in the window
becomes brightest.
3
G CUTOFF adjustment
N358 G CUTOFF
1. On the G CUTOFF item, press the ENTER key to
display the special gamma.
2. Adjust the value so that the color in the window
becomes brightest.
4
B CUTOFF adjustment
N358 B CUTOFF
1. On the B CUTOFF item, press the ENTER key to
display the special gamma.
2. Adjust the value so that the color in the window
becomes brightest.
5
Setting
Set the window white level of the window pattern
from the signal generator to 80IRE.
from the signal generator to 80IRE.
80IRE
6
R DRIVE adjustment
N358 R DRIVE
1. On the R DRIVE item, press the ENTER key to
display the special gamma.
2. Adjust the value so that the color in the window
becomes brightest.
7
G DRIVE adjustment
N358 G DRIVE
1. On the G DRIVE item, press the ENTER key to
display the special gamma.
2. Adjust the value so that the color in the window
becomes brightest.
8
B DRIVE adjustment
N358 B DRIVE
1. On the B DRIVE item, press the ENTER key to
display the special gamma.
2. Adjust the value so that the color in the window
becomes brightest.
9
Setting
On the item, press the ENTER key again to make the
special gamma disappear.
special gamma disappear.
Set the color system to N358.
Click on the first or last page to see other LC-M3700 (serv.man7) service manuals if exist.