LC-90LE757E (serv.man2) - Sharp TV User Guide / Operation Manual. Page 82

Ensure that your TV software version is always up to 
date. From time to time SHARP will make updated 
TV base software and DVB software available.

Go to “TV Menu” > “Setup” > “View setting” > 
“Individual setting” > “Standby search” > 
“Download setup”.

*  All countries except UK, Sweden, Finland and Italy are 

set to “No” for this function.

The TV automatically determines whether a new 
software version is available when the TV is in 
standby mode.

Automatically searches for new 
software updates available when the 
TV is in standby mode.

Does not search for update 
information.

Checks if there is new software 
immediately.

You can select the method of update.

 

If the software is updated, the confirmation 
message “New download information has been 
detected.” appears.*

•  If the TV receives the update service while in 

standby mode, a confirmation message displays 
after turning on the power.

* 

When the download is available only at a later time, 
a confirmation message regarding the scheduled 
date and time to start downloading from a TV 
station will be displayed. Download information 
may be displayed together with the confirmation 
message.

 

Follow the screen prompts.

Starts downloading immediately.* 
It takes approximately one hour to 
update. You cannot carry out other 
operations while downloading.
•  Cancels the download by pressing 

; on the remote control unit when 
“Discontinue” is displayed on the 
screen during the update.

Does not perform downloading.

*  The download will start at the date and time for the 

scheduled download. Turn on the power of the TV 
before the scheduled time for downloading or keep it in 
standby mode.

•  Do not unplug the AC cord while receiving the data, 

otherwise it will not be captured properly.

•  Updating the software may take some time.

When external equipment is connected with the 
TV powered on and there is no audio/video output, 
the TV may determine which equipment could 
cause a problem between the TV and the external 
equipment.

•  Terminals which can be tested:

HDMI, component, composite, SCART, DVI, D-sub

•  External speakers cannot be tested. This function is 

available for the TV speakers only.

Perform a test for picture display. 
When external equipment is connected 
but the picture is not displayed, the 
test will be performed.

Perform a test for audio playback. 
When external equipment is connected 
but the audio does not playback, the 
test will be performed.

When new software is detected, you can confirm the 
update information and download the software from 
“Message list”.

Go to “TV Menu” > “Setup” > “Information” > 
“Message list”.

•  When the TV succeeds at downloading new software, 

the message is updated in the “Message list” of the 
“Information” menu.

•  The software update will not be carried out if there is no 

new software available at the specified download time.