LC-90LE757E (serv.man2) - Sharp TV User Guide / Operation Manual. Page 78

Read Sharp LC-90LE757E (serv.man2) User Guide / Operation Manual online

76
 3D brightness boost (657/757 series only)
You can adjust the backlight of the TV for 3D image 
viewing.
Item
High
The screen brightens
Middle
Low
The screen dims
NOTE
•  When “High” or “Low” is selected, “OPC”, “Backlight” 
and “Range of OPC” are not available.
•  The “3D brightness boost” is not available for 2D mode.
•  The “3D brightness boost” items can be saved for every 
3D “AV mode” item (“STANDARD (3D)”, “MOVIE (3D)”, 
“GAME (3D)”).
 3D setup
 
E
Basic operation
Go to “TV Menu” > “Setup” > “Option” > “3D 
setup” > select the menu you want to set.
 3D auto change
This function allows the TV to switch to 3D mode 
automatically when a 3D identification signal is 
detected.
Item
Mode1
When a 3D signal is detected, the TV 
switches to 3D mode automatically.
Mode2
When a 3D signal is detected, the TV 
performs the 3D image detection in 
addition to “Mode 1”.
Off
Automatic change is not performed.
NOTE
•  3D signals may not be detected depending on the signal 
format.
3D depth control
Select the method for adjusting the 3D image effect 
(depth).
Item
Auto
Adjusts the still image effect (depth) 
automatically.
Manual
For manual adjustment of the still 
image effect (depth).
NOTE
•  If you select “Manual”, adjust the 3D still image effect 
(depth) with “Depth change”.
•  This function can be adjusted when viewing 3D still 
images in USB media mode.
•  Even if you select “Auto”, the 3D still image effect 
(depth) may not be correctly adjusted depending on the 
3D still image.
•  3D still images taken in macro mode will be displayed 
with excessive depth.
•  If you experience discomfort while viewing 3D images, 
immediately discontinue viewing.
Depth change
You can adjust the 3D still image effect (depth). 
Adjust the level from _10 to 
e10. “0” is the level 
where no adjustment is made (factory preset value).
NOTE
•  This function can be adjusted when viewing 3D still 
images in USB media mode.
•  If you experience discomfort while viewing 3D images, 
immediately discontinue viewing.
 2D 
3D convert effect
You can adjust the 3D effect when converting 
images from 2D mode to 3D mode. Select a desired 
level of convert effect from 
e1 to e16.
NOTE
•  This function is only available when converting 2D 
images to 3D images.
•  When you use this function, image conversion on the TV 
will result in some differences in the original images and 
how they appear.
•  2D images that have been converted to 3D images may 
be viewed only for personal use.
Viewing time info
This function allows you to display the elapsed time 
of 3D image viewing on the screen.
Item
Yes
The elapsed time is displayed in 
one-hour increments after you start 
watching 3D images.
No
Hide the time.
3D test
This function displays 3D images for testing the 3D 
operation. Clicking “Start” on the screen plays back 
3D test images.
NOTE
•  If you press 
> during playback, the previous screen 
will be displayed.
3D glasses control
To enable this function, set the location of the TV to 
“STORE” (Page 15). 
Item
On
Switch on signals to the 3D glasses.
When watching 3D images, switch this 
setting to “On”.
Off
Switch off signals to the 3D glasses.
This will stop the TV from influencing 
3D glasses that may be in that area of 
the store.
Enjoying 3D image viewing
Page of 94
Display

Click on the first or last page to see other LC-90LE757E (serv.man2) service manuals if exist.