Read Sony HT-DDW5400 / SS-CNP5400 / SS-CRP5400 / SS-MSP5400 / SS-SRP5400 / SS-WP5400 Service Manual online
SERVICE MANUAL
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
SPECIFICATIONS
SPEAKER SYSTEM
9-890-565-01
2011C08-1
©
2011.03
South African Model
• SS-WP5400 is the subwoofer in HT-DDW5400.
• SS-CNP5400 is the center speaker in HT-DDW5400
• SS-MSP5400 is the front speaker in HT-DDW5400.
• SS-SRP5400 is the surround/surround back speaker in HT-DDW5400.
• SS-CRP5400 is composed of SS-CNP5400,SS-MSP5400 and SS-
• SS-CNP5400 is the center speaker in HT-DDW5400
• SS-MSP5400 is the front speaker in HT-DDW5400.
• SS-SRP5400 is the surround/surround back speaker in HT-DDW5400.
• SS-CRP5400 is composed of SS-CNP5400,SS-MSP5400 and SS-
SRP5400.
Photo: SS-WP5400
Photo: SS-CNP5400
Photo: SS-SRP5400
SS-CRP5400 COMPONENT MODEL NAME
SS-CRP5400
Front speaker
SS-MSP5400
Center speaker
SS-CNP5400
Surround/Surround back speaker
SS-SRP5400
Ver. 1.0 2011.03
• JIG
When disassembling the set, use the following jig (for speaker
When disassembling the set, use the following jig (for speaker
removal).
Part No.: J-2501-238-A
JIG FOR SPEAKER REMOVAL
JIG FOR SPEAKER REMOVAL
Photo: SS-MSP5400
SS-CNP5400/MSP5400/
SRP5400/WP5400
SS-CRP5400
Speaker section
• Front speaker (SS-MSP5400)
Speaker system
2-way, 3-driver, Bass
refl ex, Magnetically
shielded
Speaker unit
Woofer:
Woofer:
200 mm, cone type × 2
Tweeter:
25 mm, horn type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
250 mm × 955 mm ×
304 mm
(with foot)
Mass (Approx.)
14.0 kg
• Center speaker (SS-CNP5400)
Speaker system
2-way, 3-driver, Bass
refl ex, Magnetically
shielded
Speaker unit
Woofer:
Woofer:
100 mm, cone type × 2
Tweeter:
25 mm, horn type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
515 mm × 175 mm ×
245 mm
(with foot)
Mass (Approx.)
4.7 kg
• Surround/Surround back speaker (SS-SRP5400)
Speaker system
Full range, Bass refl ex
Speaker unit
Woofer:
Woofer:
100 mm, cone type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
174 mm × 220 mm ×
180 mm
(with foot)
Mass (Approx.)
1.6 kg
• Subwoofer (SS-WP5400)
Speaker system
Bass refl ex, Magnetically
shielded
Speaker unit
250 mm, cone type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
335 mm × 420 mm × 330 mm
(with foot)
Mass (Approx.) 7.9 kg
Design and specifi cations are subject to change without notice.
SS-CNP5400/MSP5400/SRP5400/WP5400
2
SECTION 1
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
1-1. WOOFER PANEL ASSY (SS-WP5400)
1-2. WOOFER PANEL ASSY, HORN ASSY (SS-CNP5400)
eight bosses
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
Insert a flat-tip screwdriver into a recess
in the service holes to raise the
woofer panel assy a little.
woofer panel assy
woofer panel assy
horn assy
woofer panel assy
Insert a flat-tip screwdriver
into a recess in the bottom of the set
to raise the front panel assy a little.
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note 1:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
Note 2:
Please insert jig from a gap on the front
panel assy underside and expand the
surrounding gap in turn.
Insert the jig (J-2501-238-A) into a space and raise
the front panel assy gradually.
Note 1:
When using a jig, please work so as not to injure
front panel and speaker cabinet.
Note 2:
Please insert jig from a gap on the front panel assy
underside and expand the surrounding gap in turn.
four bosses
four bosses
six bosses
SS-CNP5400/MSP5400/SRP5400/WP5400
3
1 Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note 1: When using a jig, please work so as not to injure
front panel and speaker cabinet.
2 woofer panel assy
3 horn assy
eight bosses
2 woofer panel assy
eight bosses
eight bosses
1 Insert a flat-tip screwdriver into a recess
in the service holes to raise the
woofer panel assy a little.
1-3. OVERALL ASSY, DUCT PANEL ASSY (SS-MSP5400)
1-4. OVERALL ASSY (SS-SRP5400)
four bosses
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
Insert a flat-tip screwdriver into a recess
in the service holes to raise the
woofer panel assy a little.
woofer panel assy
4
SS-CNP5400/MSP5400/SRP5400/WP5400
SECTION 2
EXPLODED VIEWS
1
A-1641-376-A WOOFER PANEL ASSY
2
4-229-966-02 SCREW (4X16), +BV TAPPING
SP1
1-826-607-31 LOUD SPEAKER (25CM)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice.
vice.
Some delay should be anticipated when
ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
R
R
Parts Color Cabinet’s Color
2-1. SS-WP5400
SP1
not supplied
not
supplied
not supplied
1
2