LC-52XD1E (serv.man12) - Sharp TV User Guide / Operation Manual. Page 10

Press

 a on the TV.

NOTE
•  If you are not going to use this TV for a long period of time, 

be sure to remove the AC cord from the power outlet.

•  Weak electric power is still consumed even when 

a is 

turned off.

•  In DTV input mode, if the power is turned off immediately 

after a setting change from the menu screen, the new 
setting or channel information may not be memorised.

When the TV powers on for the fi rst time after 
purchase, the initial auto installation (Analogue) is 
invoked. Follow the menus and make the necessary 
settings one after another.

NOTE
•  To reconfi gure the initial auto installation settings, go to 

“Channels” and run “Search wizard” from the Setup menu. 
(Page 16)

Setting the on-screen display language

1 Press a/b/c/d to select the desired language 

listed on the screen. 

2 Press OK to enter the setting.

Setting the country (“Location of TV set” screen)

1 Press a/b/c/d to select your country or area 

listed on the screen. 

2 Press OK to enter the setting.
•  An overview of settings to be used for auto search 

displays.

Press OK to start the search.

•  The TV searches for, sorts and stores all the 

receivable TV stations according to their settings and 
the connected antenna.

•  To abort the initial auto installation in progress, press 

.

When the auto sorting is completed, the item 
“Decoder” displays. Press 

c/d to select “EXT 

1” or “EXT 2”, and then press OK.

•  Make sure to select the terminal (EXT 1 or 2) to which 

the decoder is connected.

A message appears indicating that the fi rst 
installation is successfully completed. Press 
OK, if necessary.

•  If a recording device with AV-Link is connected to 

EXT 2, the TV automatically starts transferring the 
station  list data to the recording device.

Press 

B on the remote control unit when the TV is on.

•  The TV enters standby mode and the image on the screen 

disappears.

• The 

B indicator on the TV changes from green to red.

•  To completely turn off the power to the TV, unplug the AC 

cord from the AC outlet. However, do not unplug the AC 
cord unless otherwise instructed.

Off

Power off

Digital Video Broadcasting is a transmission scheme. 
It is much more than a simple replacement for existing 
analogue television transmission. DVB provides more 
stations, clearer picture quality and other services 
displayed on the screen. It also allows a range of new 
features and services including subtitles and multiple 
audio tracks.

To watch DTV broadcasts, follow the procedures below 
to scan all available services in your area.

NOTE
•  Make sure to perform Initial auto installation 

Press DTV (or 

b, then 

a/b to select “DTV”, 

and then press OK) to access the DTV mode.

Press DTV MENU and the DTV Menu screen 
displays.

Press 

c/d to select “Installation”. 

Press 

a/b to select “Auto Installation”, and 

then press OK. 

 

If you have already set the PIN, enter it here. If 
not, enter the factory preset PIN “1234”.

•  See page 17 for setting PIN.
•  A confi rmation message displays. Press 

c/d to 

select “Yes”, and then press OK to start the search.

The TV starts scanning all available DTV and 
radio services in your area.

NOTE
•  The language and country settings used in this operation 

are the settings you have already set while executing 
the  Initial auto installation (Analogue). If you want to 
reconfi gure the country setting, for instance after moving 
to another country, conduct “Search wizard” from the 
Analogue Menu again. (Page 16)

•  The DTV services are searched and stored according to the 

channel number information embedded in the TV signal (if 
available). If the information is not available, the services are 
stored according to the order in which they were received.

  If you would like to sort the order, it is possible to arrange it 

as explained in page 25.

•  To cancel the scan in progress, press END.
•  You cannot select any DTV-related menu items unless “Auto 

Installation” has been completed.

Green

Red

The TV is in standby mode.

The TV is on.