LC-50LE651K (serv.man4) - Sharp TV User Guide / Operation Manual. Page 15

1 Select 

satellite.

 

Press

 

J

 to continue.

2  Specify here the oscillator frequency for your LNB.

 

If your set is connected to a single-cable system 

without external voltage supply, you can connect 
the antenna  supply (13V or 18V / max. 450mA) 
with 13V or 18V.

Continue with Setting options for DVB-S reception 
below.

● 

If several networks are available via DVB-S, you 
can decide which network you want to receive your 
channels from.

● 

If several satellites are received, the following settings 
must be made for every satellite. The type of settings 
available may differ depending on the selected satellite 
or network.

● 

Select yes to save all scrambled stations.
•  These stations can only be received in connection 

with a CI module and the appropriate CA Card.

•  If a CI module with a CA Card is already inserted 

for the station search, all the stations which this 
module can descramble are also saved when no 
is selected.

● 

If you select Frequency Search here, a search is 
performed for all receivable stations. With Network 
Search, from all receivable networks all the stations are 
searched which are supplied by these networks.

● 

The symbol rate is specified by the satellite provider and 
normally does not need to be changed.

● 

This setting allows you to decide whether you want to 
accept the Logical Channel Number (LCN).
Press 

J

 to continue.

Continue with Setting options for all types of 
reception below.

● 

Allows you to restrict programmes depending on the age 
classification.

The information about age classification is provided by 
the broadcasting station. 
The stations locked can only be watched after entering 
the access code (see page 24).

● 

Enter the correct values with the numeric buttons here.

● 

● 

Here you can now specify if you wish to configure a 
network  "Configure now" (see page 47) or you wish 
to configure it later "Do not configure or configure 
later".