LC-50LE651K (serv.man4) - Sharp TV User Guide / Operation Manual. Page 13

Reception of a single satellite via a connected LNC 
(LNB).

1  Select satellite. 

Press 

J

 to continue.

2 Select Dual Band (low/high) or Single Band. 

Here you specify if you use a Dual Band (Universal) 
LBN or Single LBN.

Press 

J

 to continue.

3  Specify here the oscillator frequency for your LNB.

Normally you do not need to change the values 
for high and low band, unless the LNB of your 
satellite system uses a different oscillator frequency 
(important for the frequency display).
If you use the setting Single Band in step Dual/
Single Band, you only have to define the LNB 
frequency for the Low Band.

4 Press 

J

 to continue.

See  Setting options for all DVB-S reception on 
page 13

 

to continue.

1 Select 

Satellite1/Satellite2 

2  Select satellite name from list and press

Press

J

 to continue.

3  Specify here the oscillator frequency for your LNB.

Normally you do not need to change the values 
for high and low band, unless the LNB of your 
satellite system uses a different oscillator frequency 
(important for the frequency display).

4 Press 

OK to select frequency and press 

J

  to 

continue.

See  Setting options for all DVB-S reception on 
page 13

 

to continue.

Select DiSEqC multiswitch and adpat settings for this 
selection.