LC-50LE651K (serv.man4) - Sharp TV User Guide / Operation Manual. Page 12

• The 

value 

of 

Frequency and Network ID should 

be set to the value specified by the cable provider.

Press 

J

 to continue.

If you have not selected a DVB-S antenna in the 
antenna selection, continue with Settings for all types 
of reception on page 13.

Select the satellite system.

Specify how you receive which satellite(s) (single 
satellite or type of satellite system). Ask your dealer in 
this regard.

The normal DVB-S settings are derived from the 
selection of the location and do not need to be changed 
in most cases.

● 

Reception of a single satellite via a connected LNC 
(LNB). See page 11 for settings.

● 

Reception of two different satellites with two LNCs 
(LNBs) which are connected to the TV set by a 22 
kHz switchbox. See page 11 for settings.

● 

 

Reception of two different satellites with two LNCs 
(LNBs) which are connected to the TV set by a 
toneburst switch. See page 11 for settings. 

● 

The TV set controls a DiSEqC multiswitch to which 
up to four LNCs (LNBs) for different satellites are 
connected. See page 11 for settings.

● 

 

Select setting if the TV set is connected to a DiSEqC 
single cable system (according to EN50494). Several 
satellite receivers can be connected to one satellite 
cable. See page 12 for settings.

● 

 

Select this setting if the TV set is connected to a 
single-cable system (without DiSEqC). Several 
satellite receivers can be connected to one satellite 
cable. As opposed to a DiSEqC one cable system 
there are restrictions in the range of certain reception 
frequencies in common single-cable community 
systems. See page 13 for settings.

Press 

J

 to continue.

If you have not selected DVB-C antenna in the 
antenna selection, continue with Setting options for 
DVB-S reception below.

The normal DVB-C settings are derived from the 
selection of the location and do not need to be changed. 

Press 

▲/▼/◄/► to change each item to the appropriate 

settings:
 

●

 

● 

If several networks are available via DVB-C, you 
can decide which network you want to receive your 
channels from.

 

●

 

● 

You can specify if coded stations are to be searched 
for in the search/update.

Select yes to save all scrambled stations.

•These stations can only be received in connection with a CI 

module and the appropriate CA Card.

•If a CI module with a CA Card is already inserted for the station 

search, all the stations which this module can descramble are 
also saved when no is selected.

 

●

 

● 

If you select Frequency Search, a search is 
performed for all receivable stations. With Network 
Search, only the stations which the networks 
supply are searched, either for all receivable 
networks or only for the particular network specified 
under Network ID.

 

●

 

● 

 

The DVB stations are only searched for in the 
frequency range above the start frequency.

 

●

 

● 

Change this setting to register only the specified 
network ID.

 

●

 

● 

In various countries, digital stations are transmitted 
with a preset channel number per station, known as 
"Logical Channel  Numbers" (LCN).
If you select yes, these default channel numbers will 
be used and the channels  will be sorted as per LCN. 

8  Supplying power to the antenna.
 

If you use a DVB-T antenna that requires a supply voltage 
and which is not supplied via a power adapter, then select 
yes (5V) for the antenna's power supply.

Press 

J

 

button. 

How to align your DVB-T antenna is described on 
page 14.

9  Continue with Settings for all types of reception 
 

(See page 13).