LC-46XD1E (serv.man7). Major IC Informations - Sharp TV Service Manual (repair manual). Page 21

Read Sharp LC-46XD1E (serv.man7) Service Manual online

LC-46/52XD1E-RU
7 – 21
16. IC4201/4202: RH-IXB742WJZZQ
64Mb- SDRAM  
17. IC4203: RH-IXB921WJZZ
16Mbit Flash Memory
Pin No.
Pin Name
I/O
Pin Function
38
CLK
I
Active on the positive going edge to sample all inputs.
19
I
Disables or enables device operation by masking or enabling all inputs except 
CLK,CKE and DQM.
37
CKE
I
Masks system clock to freeze operation from the next clock cycle.
CKE should be enabled at least one cycle prior to new command.
Disable input buffers for power down in standby.
22-26,
29-35
A0-A11
I
Row/column addresses are multiplexed on the same pins.
Row address: RA0-RA11,  Column address: CA0-CA8
20, 21
BA0-BA1
I
Selects bank to be activated during row address latch time.
Selects bank for read/write during column address latch time.
18
I
Latches row address on the positive going edge of the CLK with 
 low.
Eanbles row acccess <FmSdata>[amp   ] precharge.
17
I
Latches column addresses on the positive going edge of the CLK with 
 low.
Enables column access.
16
I
Enables write operation and row precharge.
Latches data in starting from 
,
 active.
15,39
DQM
I/O
Makes data output Hi-Z, tsHZ after the clock and masks the output. Blocks data 
input when DQM active.
2,4,5,7,8,10,11,13,42,44,45,
47,48,50,51,53
DQ0-X15
I/O
Data input/output are mutiplexed on the same pins
(X16;DQ0-15)
1,14,27,28,41,54
VDD/VSS
---
Power and ground for the input buffers and the core logic.
3,6,9,12,43,46,49,52,
VDDQ/VSSQ
---
Lsolated power supply and ground for the output buffers to provide improved 
noise immunity.
40
N.C/RFU
---
This pin is recommended to be left No Connection on the device.
Pin No.
Pin Name
I/O
Pin Function
1-10,
16-25,
48,13
A2-A22
I
22 Address Input.
29,31,33,35,38,40,42,44
DQ0-DQ7
I/O
8 Data Input/Output.
30,32,34,
36,39,41,43
DQ8-DQ14
I/O
Data Input/Output.
45
DQ15A-1
I/O
Data Input/Output or Address Input.
26
I
Chip Enable.
28
O
Output Enable
11
I
Write Enable.
12
I
Reset/Block Temporary Unprotect
15
O
Read/Busy Output.
47
I
Byte/Word Organization Select.
37
Vcc
-
Supply Voltage.
27,46
Vss
-
Ground.
N.C.
-
Not Connected Internally.
CS
RAS
RAS
CAS
CAS
WE
CAS WE
E
G
W
RP
RB
BYTE
Page of 24
Display

Click on the first or last page to see other LC-46XD1E (serv.man7) service manuals if exist.