LC-42SA1E (serv.man2). Adjustment Procedure - Sharp TV Service Manual (repair manual). Page 14

LC-42SA1E/RU

3 – 14

* The adjustment process mode menu is listed in Section 5.

1. Signal generator level adjustment check (Adjustment to the specified level)

1. Enter the adjustment process mode according to Section 3.

•Composite signal PAL

: 0.7Vp-p  

±0.02Vp-p (Pedestal to white level)

•15K component signal

: Y level               0.7Vp-p 

±0.02Vp-p (Pedestal to white level)

  (50 Hz)

  PB, PR level      0.7Vp-p 

±0.02Vp-p

1

Setting

[Signal]
PAL
Sprit Field Colour Bar
RF signal UV

[Terminal]
TUNER

•Feed the PAL Sprit Field colour bar signal  to TUNER.
  Signal level: 52 dB 

µV   +0dB ,  -1dB (75Ω  LOAD)

2

Auto adjustment
performance

Adjustment process
Page3

Bring the cursor on [

RF AGC ADJ] and press [OK]

[

RF AGC ADJ  OK] appears when finished.

1

Setting

[Signal]
PAL
Full Field Color Bar
Composite or RF signal

[Terminal]
EXT3 VIDEO IN
TUNER

•Feed the PAL full field colour bar signal (75% colour saturation) to    
  EXT3 VIDEO IN.
•Feed the RF signal (PAL colour bar) to TUNER.
•Make sure the PAL colour bar pattern  has the sync level of 7:3 with 
  the picture level.

2

Auto adjustment
performance

Adjustment process
Page3

Bring the cursor on [

PAL + TUNER ADJ] and press [OK]

[

PAL + TUNER ADJ  OK] appears when finished.

[RF Signal]

㸡

100% white

㸡

100% white

㪲

VIDEO IN SIGNAL]

㸡

100% white

[RF Signal]