LC-39LE651K (serv.man4) - Sharp TV User Guide / Operation Manual. Page 56

 

Select the 3D source (HDMI).

 

Press 3D button on remote control.

• 

The TV screen may temporarily become black when the TV 
is trying to detect a 3D image signal and when switching 
from 3D to 2D mode.

The image signal may contain a 3D identification signal. 
You can enable the TV to automatically detect the 3D 
image type.

• 

After pressing 3D button a screen appears prompting 
you to select between the following options.

E

The 3D display format is detected automatically and 
the appropriate 3D image is displayed.

E

The image is displayed as 2D format.

You can enjoy 3D-supported images on the TV when 
you wear 3D glasses (AN-3DG20-B or AN-3DG35), 
sold separately.

Confi rm how to use the 3D glasses before watching 
3D-supported images. These 3D glasses are only for 
use with SHARP LCD TVs supporting 3D.

● 

● 

If you set this adjust to on, all 2D images will be 
displayed in 3D. You will need to wear the 3D glasses 
to view it properly.
● 

● 

● 

 

Here you can deactivate the 3D mode of the TV. The 
TV shows the 2D/3D images in the same way as it is 
provided by the station or external player.

● 

 

If the TV is set to this setting (factory setting), then 
the TV automatically switches over to the correct 3D 
mode if it is possible.

Only change the setting if the 3D content is not 
displayed correctly.

● 

 

To display 3D content in side by side format. When 
viewing 3D content with this setting, two almost 
identical images are displayed next to each other and 
are put together correctly by the TV set.

● 

 

To display 3D content in top/bottom format. When 
viewing 3D content with this setting, two almost 
identical images are displayed one above the other 
and are put together correctly by the TV set.