LC-39LE651K (serv.man4) - Sharp TV User Guide / Operation Manual. Page 57

You can convert normal 2D images into 3D images (3D 
effect).

Press 3D button on remote control.

2  Press

 

a/b to select "2D->3D"

→"on", and then 

press 

;. 

Turn on the power of the 3D glasses, and then 
wear the 3D glasses.

When the TV receives a 3D image signal that cannot be 
detected automatically, you can select between 3D and 
2D image viewing.

Select the 3D source (HDMI).

Press 3D button on remote control. The following 
screen appears.

Press 

c/d  to select “side by side” , “top/

bottom” or “Games”, and then press 

;.

E

To view in 3D mode ("side by side" or 
"top-bottom")

 

1

Press 

c/d to select the 3D signal type (“side 

by side” or “top/bottom”), and then press 

;.

• If you select the same system as that of the input 

signal, 3D images are displayed.

 

2

Turn on the 3D glasses switching them to "3D" 
and then wear the 3D glasses.

•  The LED lights up green.

E

To view 2D mode without glasses:

 

1

Press 

a/b to select  "

, and then press 

;. 

To view 2D mode some of you at the same time 
than other people are viewing 3D mode (only with 
AN-3DG20-B glasses):

 

1

Follow up the step 

1 of previously described 

in "

or "top-bottom")

".

 

2

Turn on the 3D glasses switching to "2D" and 
then wear the 3D glasses.

•  The LED lights up green.

• 

After approximately 10 minutes without receiving 3D signal 
the 3D glasses turn off automatically.

• 

To power off the power of 3D glasses, switch them to Off. 
The LED will also turn off. 

When the battery power is low, the LED light blinks one 
time per second. If the 3D glasses battery runs out, 
you can recharge the 3D glasses battery by connecting 
the USB-mini USB cable, supplied with glasses,

 

to any 

of the TV set side USB terminals or any other proper 
source.

When the LED light goes off, the recharge is complete.

• 

If the input signal switches to 2D, 2D images are 
displayed automatically.

• 

3D mode is cancelled automatically when: the 
setting is changed, the input source is changed, 
the input signal resolution is changed or the power 
is turned off.

AN-3DG20-B glasses

(HDD)

USB

AN-3DG20-B glasses