LC-39LE651K (serv.man4) - Sharp TV User Guide / Operation Manual. Page 51

Select

 

V 

on the screen during playback to fast forward. 

By selecting 

V

 repeatedly, allows you to increase the 

fast forwards speed. 

Select  

             

on the screen and press OK button to 

restore the normal speed.

By selecting 

L 

on the screen the recording fast 

forwards in intervals of two minutes. 

Select

 

S 

on the screen during playback to rewind. By 

selecting 

S

 repeatedly, it allows you to increase the 

rewind speed. 

Select  

             

on the screen and press OK button to 

restore the normal speed.

By selecting 

T 

on the screen the recording rewinds in 

intervals of two minutes.

You

 can make a few settings in the USB REC menu to adapt 

it to your requirements.

Go to MENU

→Setup→Control→more→USB REC, 

then press OK:

● 

● 

If an entry has been hidden in an archive recording, you 
can be informed by a screen message when skipping a 
hidden area. The factory default is set to yes.
● 

● 

Set the standard jump width (in minutes) used from 
jumping forwards or backwards in the film by pressing 

S 

or

 

V.

 Use the numeric buttons on the remote 

control to enter the time.

• If 

Smart jump is activated, the jump width can 

only be set between 1 and 4 minutes.

● 

● 

If  Smart Jump is activated, the jump width is halved 
every time you change the jump direction. The jump 
width is doubled if you jump more than three times in 
the same direction (max. 8 min.).
● 

● 

A broadcast programmed with the recording type 
Serial  is recorded if it begins within the programmed 
start time ± series recording tolerance. Use the numeric 
buttons on the remote control to enter the time (always 
two-digit for 01 to 60 min.).

USB REC function allows you to record a TV programme 
and watch it later. It also allows you to schedule one or 
more recordings and they will be available to view later 
on.

If EPG or teletext data are available, the USB REC 
stores the title and additional information about each 
programme.

If additional languages are being transmitted for a DVB 
broadcast, these are also recorded. DVB subtitles 
or teletext subtitles are recorded if the recording of 
subtitles has been activated in the USB REC settings.
USB REC requires an external USB 2.0 memory or a 
hard disk, always connected and previously configured 
to record the information. 
The first USB device connected appears as USB1 
terminal.
The USB memory must be formatted before first 
use for USB REC function.

Manual recording
Record interesting programmes directly into USB 
memory with the USB REC button. When viewing time-
shift broadcasts the current broadcast can be saved to 
the USB memory. The programme is recorded from the 
beginning to the end of the time offset recording or to 
the end of the set recording time.
Timer-controlled recording
Select your favourite programme for recording, from 
the EPG. The timer overview has room for 50 entries. 
Watch the programmes later from the USB memory.
Serial recording
You can conveniently programme series broadcast with 
alternating start times.
Time shift viewing with archive recording
If you are recording a programme and would like to 
watch it before it has finished, you can watch the movie 
with a time shift while the rest is still being recorded.