Read Sharp LC-39LE651K (serv.man11) Technical Bulletin online
LCD 2013 07 01
Date of Issue:
12
th
July 2013
Classification:
White
LCD TELEVISION TECHNICAL BULLETIN
Page 3 of 4
Sharp Electronics (UK) Limited
Reference
– RG12072013-1
Revision - 2
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
USB update Procedure
….cont
10.
When the television turns on, wait for 30 seconds after the “SHARP” logo appears
and then unplug the television from the mains power.
and then unplug the television from the mains power.
Note
– At this point the firmware is loaded into the EEPROM.
11. Plug the television into the mains and wait 10 seconds after the input signal
appears (DTV, HDMI, PC, etc.).
12.
Reset the settings and repeat the initial installation:
a. Press the MENU button on your remote control.
b.
b.
Using the ◄/►, ▲/▼ and the OK button, select
“EXTRAS”, “SPECIAL
FUNCTIONS”, “RESET TO FACTORY SETTINGS”.
c.
Follow the on-screen instructions and repeat the initial installation.
13.
The update is now complete. If you experience any failures during the process,
repeat the update process from step 1.
repeat the update process from step 1.
Click on the first or last page to see other LC-39LE651K (serv.man11) service manuals if exist.