Read Sharp LC-32WD1E (serv.man2) User Guide / Operation Manual online
3
Supplied accessories
Quick start guide
1
To receive analogue or digital terrestrially broadcasted stations, connect the antenna cable (from the antenna/cable
socket or the room/roof antenna) to the input antenna port on the back of the television. If there is good reception, an
indoor antenna can also be used. If you are using an active antenna, the supply voltage (5V) must also be set. (See
page 18.)
socket or the room/roof antenna) to the input antenna port on the back of the television. If there is good reception, an
indoor antenna can also be used. If you are using an active antenna, the supply voltage (5V) must also be set. (See
page 18.)
2
Connect the AC cord to the power port on the back of the television.
3
Plug the AC cord into the AC outlet.
Setting up the TV
!
WARNING!
IT IS THE RESPONSIBILITY OF THE INSTALLER TO MAKE SURE THE TELEVISION IS INSTALLED
SAFELY. IF YOU ARE USING ANY ACCESSORIES WITH THIS TELEVISION (SUCH AS A WALL
MOUNT BRACKET OR A TELEVISION STAND), FOLLOW THE ACCESSORY MANUFACTURER’S
SPECIFICATIONS AND INSTALLATION INSTRUCTIONS.
SAFELY. IF YOU ARE USING ANY ACCESSORIES WITH THIS TELEVISION (SUCH AS A WALL
MOUNT BRACKET OR A TELEVISION STAND), FOLLOW THE ACCESSORY MANUFACTURER’S
SPECIFICATIONS AND INSTALLATION INSTRUCTIONS.
A A
Remote control unit (x1)
Batteries (x2)
Cable clamp (x1)
(For Europe, except
U.K. and Eire)
Cable tie (x1)
AC cord (x1 or x2)
(For U.K. and Eire)
U.K. type 3-pin AC cord is only
included with model LC-32WD1E
Page 3
•
Operation manual (This publication)
1
2
3
(For Europe, except
U.K. and Eire)
U.K. and Eire)
(For U.K. and Eire)
AC cord
Place the TV close to
the AC outlet, and keep
the power plug within
reach.
the AC outlet, and keep
the power plug within
reach.
Page 3 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN
Click on the first or last page to see other LC-32WD1E (serv.man2) service manuals if exist.