LC-32WD1E (serv.man2) - Sharp TV User Guide / Operation Manual. Page 9

Read Sharp LC-32WD1E (serv.man2) User Guide / Operation Manual online

7
Quick start guide
To turn on the TV, press   on the remote control or on the 
TV. 
NOTE:
If the TV is not going to be used for a long period 
of time, unplug the power cord from the AC outlet 
to remove AC power. 
Press   on the remote control when the TV is on. 
This will put the TV into standby mode. The image 
on the TV will disappear and the   indicator on 
the TV will change from green to red. (See 
page 5.)
Small amounts of electrical power are being used 
when the TV is in standby mode. To completely 
remove power from the TV, unplug the power cord 
from the AC outlet.
There is an active standby mode and a passive 
standby mode. 
Television rear and side view
EXT 2
(SCART input/output)
EXT 1*
(SCART input/output)
Antenna input
(DVB-T 5V=/80 mA)
EXT 4
(Component input)
Common 
Interface slot
 (Standby/On button)
 (Input button)
(
-
/
+
) (Volume buttons)
P (
/
)
(Programme [channel] buttons)
AC Input
Service (D-Sub 9)
EXT 6 (HDMI input, Stereo input 
for DVI-HDMI connections)
Audio output
EXT 5 (VGA / Stereo input)
EXT 7 
(HDMI input)
EXT 3 Connections
S-Video input (Y/C)
Composite input (CVBS)
Audio input - Left
Audio input - Right
Headphones (audio out)
*EXT 1 provides tuner output. Use EXT 1 to connect a decoder or
audiovisual equipment used for recording purposes (ex. VCR).
The S-Video (Y/C) and composite (CVBS) connection 
cannot be used at the same time.
Turning on the television
Standby mode and LED indicator
Page 7 of 204  June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN
Page of 38
Display

Click on the first or last page to see other LC-32WD1E (serv.man2) service manuals if exist.