Read Sharp LC-32SH130K (serv.man11) Service Manual online
74
LC-32SH130E
LC-32SH130K
LC-32SH340E
2.14.16
Copy From USB
There are two steps and both are independent of each other.
If there is file named “hotel_wel.png” in directory “welcome_image”. It is copied to TV to use as welcome
image.
image.
Copy from USB device data to NVRAM. Just the reverse operation done by copy to USB call. Previously copied
nvram files (Flashx.bin) are copied into TV. If there is no flash file or some of them are available on USB, the
available ones are copied. If no USB is connected, nothing happens.
nvram files (Flashx.bin) are copied into TV. If there is no flash file or some of them are available on USB, the
available ones are copied. If no USB is connected, nothing happens.
2.14.17
USB Option
If ON is selected TV will go on normal operation. If it is OFF USB device will not receive on none of the USB
ports.
ports.
2.14.18
Fixed Pic. Mode
If OFF is selected TV will go on normal operation. If it is ON Main menu/Picture quick menu/mode and quick
menu/picture zoom will be inaccessible.
menu/picture zoom will be inaccessible.
2.14.19
Digital Tuner
If ON is selected TV will go on normal operation. If it is OFF TV will display “no signal” message when tuned to
digital channels existing in active channel list, and digital channels will not be detected in auto or manual
searches.
digital channels existing in active channel list, and digital channels will not be detected in auto or manual
searches.
2.14.20
Multiple RC Support
If OFF is selected TV will go on normal operation. If it is ON RCU type (system code) that is chosen in “RCU
program menu” will be used. “RCU program menu” can be opened by RETURN-1-2-3-4 shortcut.
program menu” will be used. “RCU program menu” can be opened by RETURN-1-2-3-4 shortcut.
2.14.21
Welcome message
As default behaviour a welcome message image will be displayed (if hotel mode is enabled). The image will
stay on screen until user presses a key.
stay on screen until user presses a key.
On the bottom side of image there is a message (OSD message) displaying “press any key”
Welcome image can be changed through USB (described in “copy from USB” section). A default welcome image
is available. Welcome images are .PNG files with the resolution of 960X540.
is available. Welcome images are .PNG files with the resolution of 960X540.
2.14.22
Signal Lost (no signal) message
As default behaviour, if there is no signal the same welcome image is displayed. This time OSD message is “no
signal”.
signal”.
2.14.23
Internal Clock
If hotel mode is active a new function (add wake up timer) will be available in Settings/Timers menu. That
function will open a new menu to set wake up time. After timer is saved, TV can wake up automatically on
desired time.
function will open a new menu to set wake up time. After timer is saved, TV can wake up automatically on
desired time.
If alarm option was selected as “on” after wake up TV will show welcome image and an alarm will be heard
then any key will stop alarm and welcome image.
then any key will stop alarm and welcome image.
If alarm option was selected as “off” after wake up TV will not show welcome image and the alarm will not be
activated.
activated.
Click on the first or last page to see other LC-32SH130K (serv.man11) service manuals if exist.