LC-32SD1E (serv.man7). Adjustment Procedure - Sharp TV Service Manual (repair manual). Page 25

LC-26SD1E/RU, LC-32SD1E/RU

5 – 25

During servicing of the LCD TV set, by software upgrading or by any cleaning NVM, it’s mandatory select the “Inch Setting” in Service Mode, Page 2,
according to the size of the TV set.

Caution:

When the factory settings have been made,  all user setting data,  including the channel settings,  are initialized. (The adjust-
ments done in the adjustment process mode are not initialized.) Keep this in mind when initializing these settings.

1

Factory settings

See to below caution

•Enter  the adjustment process mode.
•Bring the cursor to [Factory Init] on page 2/11.
•Use the [Volume +-] key to select a region from [EURO/UK/ITALY/
FRANCE/RUSSIA]and press the [ENTER].
“EXECUTING” appears and initialization starts.
After a  while,”***OK***” appears and the setting is complete.
Note: Never turn the power off during initialization.
The folloeing settings will be back to their factory ones.
1. User settings
2. Channel data (e.g. broadcast frequencies)
3. Password data

After adjustments,  exit the adjustment process mode.
To exit the adjustment process mode,  unplug the AC power cord from the outlet to forcibly turn off the power.
When the power is turned off with the remoto control, unpulug the AC power cord and plug it back  in (wait apporximately 10 seconds before plug-
ging  in the AC power cord).