Read Sharp LC-32GD1E (serv.man25) User Guide / Operation Manual online
47
Basic adjustment settings (Analogue/Digital)
Language setting for on-screen
display
display
You can also select a language from setup menu.
Select from among 10 languages: English, German,
French, Italian, Spanish, Dutch, Swedish, Portuguese,
Finnish and Turkish.
Select from among 10 languages: English, German,
French, Italian, Spanish, Dutch, Swedish, Portuguese,
Finnish and Turkish.
3
Press MENU and the MENU screen displays.
1
2
4
Press c/d to select “Setup”.
Press a/b to select “Language”, and then
press OK.
press OK.
Press a/b/c/d to select the desired
language listed on the screen, and then
press OK.
language listed on the screen, and then
press OK.
OPC setting
Automatically adjusts the brightness of the screen.
Press c/d to select “Picture”.
2
Using OPC on the menu screen
Press MENU and the MENU screen displays.
1
Press a/b to select “OPC”.
Press c/d to select “On”.
3
4
Description
The brightness is fixed at the value set in
“Backlight” (see page 48).
“Backlight” (see page 48).
Automatically adjusts
Selected item
Off
On
NOTE
• When set to “On”, the System senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.
Using OPC on the remote control unit
Press OPC to switch the Optical Picture Control on
and off.
and off.
Dutch
English
Finnish
French
German
English
Finnish
French
German
Italian
Portuguese
Spanish
Swedish
Turkish
Portuguese
Spanish
Swedish
Turkish
Language list
LC-32GD1E(E)-e
04.4.15, 0:57 PM
47
48
Basic adjustment settings (Analogue/Digital)
Picture adjustments
Adjust the picture to your preference with the following
picture settings.
picture settings.
Press MENU and the MENU screen displays.
1
2
3
4
Press a/b to select a specific adjustment
item.
item.
Press c/d to adjust the item to your desired
position.
position.
Press c/d to select “Picture”.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press OK.
Adjustments items for PC source
Adjustments items for AV source
MENU
[Picture]
Picture
Audio
USER [TV]
Contrast
OPC
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
Backlight
[+8]
–8
+8
Off
On
cbutton
The screen dims
For less contrast
For less brightness
For less colour
intensity
intensity
Skin tones become
purplish
purplish
For less sharpness
Selected item
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
MENU
[Picture]
Picture
Audio
Contrast
OPC
Brightness
Reset
[+30]
[0]
0
–30
+40
+30
Backlight
[+8]
–8
+8
Off
On
Red
Green
Blue
Advanced
[0]
[0]
[0]
–30
–30
–30
+30
+30
+30
USER [PC]
NOTE
• Select “Advanced” and then press OK to set “C.M.S-Hue”,
“C.M.S-Saturation”, “C.M.S-Value”, “Colour Temp”, “Black”,
“3D-Y/C”, “Monochrome”, “Film Mode” or “I/P Setting”. See
pages 49 and 50.
“3D-Y/C”, “Monochrome”, “Film Mode” or “I/P Setting”. See
pages 49 and 50.
d
button
The screen brightens
For more contrast
For more brightness
For more colour
intensity
intensity
Skin tones become
greenish
greenish
For more sharpness
cbutton
The screen dims
For less contrast
For less brightness
For weaker red
For weaker green
For weaker blue
Selected item
Backlight
Contrast
Brightness
Red
Green
Blue
d
button
The screen brightens
For more contrast
For more brightness
For stronger red
For stronger green
For stronger blue
NOTE
• Select “Advanced” and then press OK to set “C.M.S-Hue”,
“C.M.S-Saturation” and “C.M.S-Value”.
LC-32GD1E(E)-e
04.4.6, 1:44 PM
48
49
Basic adjustment settings (Analogue/Digital)
C.M.S. (Colour Management System)
Colour tone is managed using the six-colour
adjustment setting.
adjustment setting.
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press OK.
press OK.
4
Press a/b to select “C.M.S.-Hue”, and then
press OK.
press OK.
5
Press a/b to select a specific adjustment
item.
item.
Press c/d to adjust the item to your desired
position.
position.
6
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press OK.
Colour temperature
Adjusts the colour temperature to give the best white
image.
image.
Press a/b to select “Colour Temp”, and then
press OK.
press OK.
Description
White with bluish tone
White with reddish tone
Selected item
High
Mid-High
Mid
Mid-Low
Low
Repeat steps 1 to 3 in C.M.S. (Colour
Management System).
Management System).
1
2
3
Press a/b to select the desired level, and
then press OK.
then press OK.
Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
selecting a level for automatically adjusting the dark
portion of an image.
Press a/b to select “Black”, and then press
OK.
OK.
Press a/b to select “On”, and then press
OK.
OK.
Repeat steps 1 to 3 in C.M.S. (Colour
Management System).
Management System).
1
2
3
C. M. S. – Hue
C. M. S. – Saturation
C. M. S. – Value
Colour Temp
Black
3D - Y/C
Monochrome
Film Mode
I/P Setting
On
Off
C. M. S-Hue
R
Y
G
C
B
M
Reset
[ 0]
[ 0]
[ 0]
[ 0]
–30
–30
–30
+30
–30
+30
+30
+30
[ 0]
–30
+30
[ 0]
–30
+30
Changing reds
closer to
magenta or yellow.
C. M. S-Saturation
C. M. S-Value
• You can select “C.M.S-Saturation” or “C.M.S-
Value” here instead of selecting “C.M.S-Hue”.
Description
No adjustment
For high detail in black portions
Selected item
Off
On
Description
This is a standard to adjust the colour
either more reddish or more bluish in tone.
either more reddish or more bluish in tone.
Increases or decreases the saturation of a
selected colour
selected colour
A higher value makes the image brighter.
A lower value makes the image darker.
A lower value makes the image darker.
Selected item
C.M.S-Hue
C.M.S-
Saturation
Saturation
C.M.S-Value
LC-32GD1E(E)-e
04.4.6, 1:44 PM
49
50
Monochrome
For viewing a video in monochrome.
Press a/b to select “Monochrome”, and
then press OK.
then press OK.
Press c/d to select “On”, and then press
OK.
OK.
Repeat steps 1 to 3 in 3D-Y/C.
1
2
3
NOTE
• When Monochrome is set to “On”, the menu screen in
DTV mode displays in monochrome.
Basic adjustment settings (Analogue/Digital)
3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
and cross colour noise.
Description
Normal adjustment
For movie image
For still image
Selected item
Standard
Fast
Slow
4
Press a/b to select “3D-Y/C”, and then
press OK.
press OK.
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press OK.
press OK.
5
Press a/b to select the desired level, and
then press OK.
then press OK.
NOTE
• “3D-Y/C” is not selectable depending on the input signal
type.
Activating 3D-Y/C on the remote control unit
Film mode
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.
Press a/b to select “Film Mode”, and then
press OK.
press OK.
• Some items may be greyed out. They are not
selectable.
Press c/d to select “On”, and then press
OK.
OK.
Repeat steps 1 to 3 in 3D-Y/C.
I/P setting
Adjusting the image and input signal can give you a
more beautiful picture.
more beautiful picture.
Press a/b to select “I/P Setting”, and then
press OK.
press OK.
• Some items may be greyed out. They are not
selectable.
Press c/d to select “Interlace” or
“Progressive”, and then press OK.
“Progressive”, and then press OK.
Repeat steps 1 to 3 in 3D-Y/C.
NOTE
• The I/P Setting is set to Progressive when Film Mode is “On”.
1
2
3
1
2
3
Press 3D-Y/C to switch the 3D-Y/C function on and
off.
off.
C. M. S. – Hue
C. M. S. – Saturation
C. M. S. – Value
Colour Temp
Black
3D Y/C
Monochrome
Film Mode
I/P Setting
Standard
Fast
Slow
NOTE
• “3D-Y/C” is set to “On” when the System is turned back
on.
• 3D-Y/C may not operate depending on the input signal
type.
LC-32GD1E(E)-e
04.4.6, 1:44 PM
50