LC-26P50E. Version 1.1 - Sharp TV Handy Guide. Page 31

31

1.

Unplug the AC power cord of running TV set to force off the power.

2.

While holding down the "VOL (–)" and "INPUT" keys on the set at once, plug in the
AC power cord to turn on the power. The letter K appears on the screen.

3.

Next, hold down the "VOL (–)" and "P (Ù)" keys on the set at once. Multiple lines of
blue characters appearing onscreen indicate that the set is now in the adjustment
process mode. If you fail to enter the adjustment process mode (the display is the
same as normal startup), retry the procedure.

4.

To exit the adjustment process mode after the adjustment is done, unplug the AC
power cord to force off the power. (When the power is turned off with the remote
controller, once unplug the AC power cord and plug it in again. In this case, wait 10
seconds or so before plugging.)

P (UP/DOWN)

P (UP/DOWN)

Moving an item (line) by one (UP/DOWN)

VOL (UP/DOWN)

VOL (UP/DOWN)

Changing a selected item setting (+1/–1)

Cursor (UP/DOWN)

Turing a page (PREVIOUS/NEXT)

Cursor (LEFT/RIGHT)

Changing a selected line setting (+10/–10)

INPUT SOURCE
on remote controller

INPUT button

Input source switching(toggle switching)
(TV -> EXT1 -> EXT2 -> EXT3 -> EXT4)

OK

Executing a function

*Input mode is switched automatically when relevant adjustment is started so far as the
necessary input signal is available.