Read Sharp LC-26GA3 (serv.man7) Service Manual online
21
LC-26GA3E
3.Entering and exiting the adjustment process mode
(1) Before entering the adjustment process mode, press the "TV RESET" button or execute the AV position
RESET in the video adjustment menu.
(2) Pull out the AC cord to turn off the TV.
(3) While holding down the "VOL (–)" and "INPUT" keys at a time, press the POWER switch of the main unit to
turn on the power.
The letter " K " appears on the screen.
(4) Press the "VOL (–)" and CH (V) keys at the same time.
When multiple lines of blue letters are displayed on the screen, the unit has entered the process adjustment
mode.
If the unit does not enter the process adjustment mode (if the same display as the normal start appears), try
again.
(5) To exit the adjustment process mode after the adjustment is done, unplug the AC cord from the outlet to
make a forced shutdown. (When the power was turned off with the remote controller, once unplug the AC
cord and plug it again. In this case, wait 10 seconds or so before plugging.)
Caution: Use due care in handling the information described here lest your users should
know how to enter the adjustment process mode. If the settings are tampered in this mode,
unrecoverable system damage may result.
4.Remote controller key operation and description of display in adjustment process
mode
(1) Key operation
Remote controller key
Main unit key
Function
CH (
Ù
/
ù
)
CH (
Ù
/
ù
)
Moving an item (line) by one (UP/DOWN)
VOL (+/–)
VOL (+/–)
Changing a selected item setting (+1/_1)
Cursor (UP/DOWN)
Turing a page (PREVIOUS/NEXT)
Cursor (LEFT/RIGHT)
Changing a selected line setting (+10/_10)
INPUT mark of the R/C
INPUT
Input switching (toggle switching)
(caution required)
(TV
→
INPUT1
→
INPUT2
→
INPUT3
→
INPUT4)
ENTER
Executing a function
* Input mode is switched automatically when relevant adjustment is started so far as the necessary input
signal is available.
(2) Description of display
(1) Current page /
Total pages
(2) Current page title
(3) Currently selected input
(4) Current color TV system
(5) Destination
Adjustment process menu header
(7) Parameters
MAIN Version
CPLD Version
Monitor Version
Monitor Version
EQ DATA CHECKSUM
STANDBY CAUSE
FAN STATUS
FAN STATUS
TEMPERATURE
1.XX (E 2004/XX/XX X)
XX
3.XX
3.XX
TELETEXT Version
DVS Version
DVS Version
TTX PRG
XX
XX
A15E
ROTATE
XX
a
AUTO
AUTO:EURO
TUNER
1/16
[INFO]
Click on the first or last page to see other LC-26GA3 (serv.man7) service manuals if exist.