Read Sharp LC-26GA3 (serv.man7) Service Manual online
26
LC-26GA3E
Adjustment item
Adjustment conditions
Adjustment procedure
1
Adjustment
DVI-I (digital)
2
Auto adjustment Page 10/16
performance
Supply XGA (1024x768_60Hz) window pattern signal to the DVI-I (analog)
input.
Bring the cursor on [
Ë
DVI DIGITAL ADJ] and press [OK].
[
Ë
DVI DIGITAL ADJ FINISH] appears when finished.
(7) DVI-I (digital) signal adjustment
100% White
0% Black
1/4
1/4
1/2
1/4
1/4
1/2
8. Adjustment of white balance
Start up the set and adjust the white balance.
1. Place the set under the following conditions.
AV Mode: [DYNAMIC]
Monochrome: [ON] Black: [OFF]
Feed the component 15k (60Hz) adjustment signal via INPUT3 to display the adjustment screen (High: 70%,
Low: 30%).
2. Execute the automatic adjustment.
1) In order for the 70% pattern to become the reference value (page 11/16), adjust the "MONITOR_R_
GAMMA_HI ", "MONITOR_G_GAMMA_HI" and "MONITOR_B_GAMMA_HI" settings.
2) In order for the 30% pattern to become the reference value (page 11/16), adjust the "MONITOR_R_
GAMMA_LO ", "MONITOR_G_GAMMA_LO" and "MONITOR_B_GAMMA_LO" settings.
Reference value: [Minolta CA-210]
(525i)
Make adjustments so that x=0.272 and y=0.275. (70% gray scale)
Make adjustments so that x=0.272 and y=0.275. (30% gray scale)
Click on the first or last page to see other LC-26GA3 (serv.man7) service manuals if exist.