GENERAL INFORMATION (serv.man6). LC40LE271K - Sharp TV User Guide / Operation Manual. Page 12

•  Video playback via a USB device may not be possible 

or the playback quality affected if the device data 

transfer speed rating is too low�

•  File number over 1000 may not be displayed�
•  No quickly operation between play / pause /  

fast forward / rewind�

•  The video might get judder or unsmooth when USB 

read/write speed is under requirement(some Full HD 

format)�

•  Files in USB 1�1 devices may not be played properly�
•  Some video file formats may not be played depending 

on the file�

In order to receive coded digital stations, a Conditional 
Access module (CA module) and a Smartcard must 
be inserted into the CI (Common Interface) slot of the 
TV�
The CA module and the Smartcard are not supplied 
accessories� They are usually available from your 
dealer�

Carefully insert the CA module into the CI slot 
with the contact-side forward�

The logo on the CA module must be facing 
outward from the rear of the TV�

•  It takes about 30 seconds to certify the license key 

when you insert a Smartcard into the CI+ compatible 

CA module for the first time� This process may fail 

when there is no antenna input or you have never run 

“Auto installation”�

•  The CI+ compatible CA module sometimes upgrades 

its firmware� You may not receive any TV images before 

upgrading� You can only use the power button during 

upgrading�

•  The CI+ compatible CA module does not allow you to 

output any copy protected programmes using monitor 

out�

•  If the TV displays an update confirmation message 

for the Smartcard while receiving CI+ compatible 

broadcasts, follow the screen prompts�

•  Make sure that the CA module is properly inserted�

After inserting and activating the CA module, make 
sure the input source is 

TV�

NOTE
•  This menu is only available for digital stations�
•  The content of this menu depends on the provider of the 

CA module�

Module:  General information on CA module displays�

Adjustment parameters of each Smartcard 

displays�

Enquiry:  You can input numerical values such as 

passwords here�

System Standby
•  When set to “On”, turning off the TV will 

automatically turn off the connected HDMI-CEC 
compliant device �

The TV can send audio data for video content shown 
on the TV to a connected audio device with just one 
ARC-compatible HDMI cable� Using this function 
eliminates the need to use a separate digital or 
analogue audio cable�

Connection for using “Audio return channel”
•  You need to use ARC-compatible cables/devices 

and connect to the 

HDMI 1 terminal to activate this 

function�

640 x 480

60Hz

800 x 600

60Hz

1024 x 768

60Hz

1280 x 768

60Hz

1360 x 768

60Hz

1280 x 1024

60Hz

480i

60Hz

480p

60Hz

576i

50Hz

576p

50Hz

720p

50Hz, 60Hz

1080i

50Hz, 60Hz

1080p

(HDMI only) 50Hz, 60Hz, 24Hz