76GF-64H (serv.man12). Split - Part 6 - TV guide, 21-pin Euro-SCART and 21-pin Audio Video, Typical connections, Troubleshooting, General specs for TV receiver, Index - page 35- - Sharp TV User Guide / Operation Manual. Page 7

41

6.1. Press the Cursor UP/DOWN buttons 

E

/ 

F

to select

Preset download. The red point mark indicates the selected item.

6.2. Press the BLUE button 

to begin preset downloading to

the VCR.
6.3. The message                                appears on the screen.

If the TV is connected to a VCR with AV LINK function or compatible,
the TV will automatically transfer the stored TV channels to the VCR.

6.4. When the message disappears, the programme list of the VCR
is now the same as of the TV set.

In this menu you can set a late start and stop time for a recording.

Select the channel you wish to record by using the 0 ~ 9 digit

or 

E

/ 

F

buttons.

Press the TV/VIDEO button  

● 

to see the TV/VIDEO Menu.

Press the BLUE button 

to see the AV LINK Menu.

Press the Cursor UP/DOWN buttons 

E

/ 

F

to select

Timer programming. The red point mark indicates the selected item.
5.

Press the BLUE button

to see the TIME PROGRAMMING

Press the Cursor UP/DOWN buttons 

E

/ 

F

to select:

Device: to select the controller set (VCR or TV) [

] by using the

Cursor LEFT/RIGHT buttons 

C 

/

I

.

Date: to enter the recording date using the number buttons. Enter 2 digits for the date, then 2 for the month. e.g. For
July 9th, press 0 9 (9th), then 0 7 (July).

Start/End: to set a late start and stop time. Enter 2 digits for the hour and 2 for the minutes for the Start, then 2 for the
hour and 2 for the minutes for the End.

Mode: if you want to make additional recordings at the same time each day or week, use  

C 

/

I

to select Daily or Weekly.

Speed: to change recording speed between Standard-Play (SP) and Long-Play (LP), by using 

C 

/

I

buttons.

Standard-Play gives the best picture quality; Long-Play provides the longest recording time.

Press the YELLOW button 

«PROG. VCR» to memorize the TIMER PROGRAMMING data.

Now the VCR should be manually set for Timer Mode. Refer to your VCR operation manual for further information.

Press the TV/VIDEO button 

●

to clear the on-screen display.

■

«Device VCR»: preferably select «Device VCR» to memorize the TIMER PROGRAMMING data in video memory

buffer.
When you select «Device VCR», Mode (Unique/Daily/Weekly) and Speed (SP/LP) can be changed only if the video
has these functions available.

■

«Device TV»: when the video cannot accept the TIMER PROGRAMMING data (i.e. when the video has the

memory buffer full), select «Device TV» to memorize the TIMER PROGRAMMING data in TV memory buffer.
When you select «Device TV», the late recording only can be applied within the next 24 hours.
When you select «Device TV», Mode (Unique) and Speed (SP) cannot be changed.
When you select «Device TV», in the event of a power cut, disconnection from the plug or if you turn off the TV by
the Main power button (

æ) on the TV set, the TIMER PROGRAMMING data will be cancelled; In order to keep the

programmed data, use Stand-by button (

æ TV) on the remote control to switch off the TV set.

AV LINK DOWNLOAD:

PROGRAM     XX