76GF-64H (serv.man12). Split - Part 6 - TV guide, 21-pin Euro-SCART and 21-pin Audio Video, Typical connections, Troubleshooting, General specs for TV receiver, Index - page 35- - Sharp TV User Guide / Operation Manual. Page 5

39

The following sections explain how to make consistent changes in the parameters displayed on the screen, so that you
will be able to expand or modify the list of broadcasting stations in order to adapt it to any changes. 

Select those broadcasting stations whose names are repeated and delete any that you do not want, using the menu
option "Delete this programme".
Assign a correct name to those that remain, using the "Edit this programme" option on the menu. You will note that when
you change the first letter, the three following letters are sometimes written as well; it is advisable to use these names.
Assign those stations that you wish to use with the TV GUIDE to programmes PR 1, Pr 2, Pr 3 and Pr 4, through the "Go
to sorting mode" option. 
Press the BLUE button to close the Stored programmes menu.
Press the MENU button, press BLUE button and press YELLOW button to see the TV Guide menu.
Make sure that each item of information displayed is correct for the stations selected in PR 1 through PR 4 (for an
explanation of the meaning, see the previous section). You may have top leave the menu and enter teletext in order to
make sure. 
If it is all correct, press BLUE button to quit. If not, you can change: 

■

the page numbers

■

the access colour (red, green, yellow, blue or none)

■

the page type (Rolling or Non-rolling) 

■

the name of the station that each access mode corresponds to using the  

C 

/

I

and 

E

/ 

F

buttons.

To enable a complete configuration of the system, the following situations have been provided for.

3.1

When a station stored in the memory sends information on a new station.

In this case, you must add an item in the station list that is contained in any given station.

To do this, press either the  

C 

or

I

buttons so that a letter or number starts to blink, and then select the option "Add

new broadcaster" pressing the RED button. You will see a new item created on the list, which has the following form: 

Then enter the correct data for this new item. 
By selecting the option "Delete this item", the item marked by the blinking cursor will be deleted. Use this option when
any previously stored station ceases to send information on a station or if an error has been made.

3.2

When a new station is stored in the memory

Before proceeding, check to see if any of the previously stored stations also send information on this new station. If so,
first follow the procedure explained in section 3.1.

To add a new station to the list, press either  

C 

or

I

buttons in such a way that no blinking cursor is on the screen.

Then select the option "Add new broadcaster". You will see that a new item has been created on the list, which has the
following form: 

Then enter the correct data for this new item.
By selecting the option "Delete this item", the item marked by the blinking cursor will be deleted.
To delete a station completely, make sure that there is no blinking cursor on the screen. Use this option if you want to
eliminate a station or if an error has been made.

new item

blink