56FW-53H (serv.man24). Split - Part 4 - Pages 16- - Sharp TV User Guide / Operation Manual. Page 7

22

Use this option to protect the access to separate programmes.
If necessary, repeat steps (1. ~ 3.).

Press the YELLOW button 

to see the LOCK PROGRAMME

Select the programme channel number you want to set with the

Cursor LEFT/RIGHT buttons 

C 

/

I

.

Press the Cursor UP/DOWN buttons 

E

/

F

to select

“Type of protection”. The red point mark indicates the selected
item.

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to select an option:

NONE: To cancel the protection from the selected programme.
ALWAYS: To protect the access from the selected programme

throughout the day

AUTO (VPS CODE): To activate the AUTOMATIC PROTECTION and the selected programme will only be blocked

when it receives the VPS signal. This VPS signal is sent by some broadcasting stations, when the programme that
is being shown is not suitable for children.

TIMER: The access to the selected programme will be protected during the programmed period.

If you have selected TIMER, press the Cursor UP/DOWN buttons 

E

/

F

to select:

Start : To enter the hour and minutes, from the beginning of protection, with the Cursor LEFT/RIGHT buttons 

C 

/

I

.

End: To enter the hour and minutes, to the end of protection, with the Cursor LEFT/RIGHT buttons 

C 

/

I

.

Press the MENU button 

● to close the LOCK PROGRAMME Menu.

This option enables you to erase all the adjustments made to the
CHILD-LOCK function.
If necessary, repeat steps (1. ~ 3.).

Press the BLUE button 

to see the CLEAR LOCK Menu

Press the BLUE button 

to confirm you want to clear the

CHILD LOCK system.

Notes:In order for the timed protection to function correctly, the internal TV clock must be set at the right time. To
check the time setting see section - Automatic or Manual time adjustment - (page 19).
When you protect one programme, all the external entries (Euro-SCART, AV-1, AV-2, Front A/V or S-Video
terminals) are protected automatically.

LOCK ALL:
When the TV is protected in this way, it will be blocked when switched on and a red box will appear on the screen
(against a blue background), along with the instruction « LOCKED MODE ».
In order to view your TV you must press any digit button 0 ~ 9 of the remote control.
If the protection is timed, the blocking of the TV will only occur during the time period programmed.

LOCK PROGRAMME:
When one or several programmes are protected, the TV will block any attempt to gain access to them and the
instruction « LOCKED MODE » will appear on the screen.
In order to view these programmes you must press any digit button 0 ~ 9 of the remote control.

If the protection of the programme you want to gain access to is timed or automatic, the blocking of the
programme will only take place during the time period programmed or on receiving the special VPS signal for
automatic blocking.