Read Sharp 56FW-53H (serv.man24) User Guide / Operation Manual online
19
Features setting mode
In this mode you can set the ON-TIMER and OFF-TIMER, set the CHILD LOCK, activate or deactivate the interactive
HELP, view the all functions implemented in your TV set demonstration and set the Post code.
HELP, view the all functions implemented in your TV set demonstration and set the Post code.
1.
Press the MENU button
● to see the MAIN Menu.
2.
Press the YELLOW button
to see the Timer Menu.
ON-TIMER
The On-Timer is used to programme switching ON the TV set during
the 24 hours of the day.
In order to be able to run this function, it is essential to adjust the
current time
the 24 hours of the day.
In order to be able to run this function, it is essential to adjust the
current time
3.
Press the Cursor UP/DOWN buttons
E
/
F
to select
“Current time”. The red point mark indicates the selected item.
Automatic TIME adjustment: If a programme with teletext is being
received, the “Current time” can be adjusted automatically with that
signal's clock.
To synchronize “Current time”, press Text/Mix/Image button a/b/I.
received, the “Current time” can be adjusted automatically with that
signal's clock.
To synchronize “Current time”, press Text/Mix/Image button a/b/I.
*
Important: If a signal via satellite is being received, or if correct time
cannot be obtained, the time will have to be adjusted manually.
Manual time adjustment: Press the Cursor LEFT/RIGHT buttons
C
/
I
to adjust the “Current time” manually.
4.
Press the Cursor UP/DOWN buttons
E
/
F
to select “Programmed switch on at”. The red point mark indicates
the selected item.
5.
Press the Cursor LEFT/RIGHT buttons
C
/
I
to adjust the switch on.
To cancel the switch on, select
.
6.
Press the MENU button
● to close the ON TIMER Menu.
7.
Press the Stand-by button ( æ TV) on the remote control to put the TV set into Stand-by Mode.
When the preset time is reached, the TV set turns ON and a picture appears on the screen.
When the preset time is reached, the TV set turns ON and a picture appears on the screen.
As a safety precaution, in the case of nobody being home when the television switches on automatically, the television
will disconnect itself after 120 minutes; if it is to continue to run, any button on the remote control functions should be
pressed.
will disconnect itself after 120 minutes; if it is to continue to run, any button on the remote control functions should be
pressed.
Note: In the event of a power cut, disconnection from the plug or television switch, all the data on the ON TIMER will be
cancelled.
cancelled.
OFF -TIMER
The OFF-Timer is used to programme switching the TV set to Stand-by
mode, after the set length of time has passed.
If necessary, repeat steps (1. ~ 2.) to see the Timer Menu.
mode, after the set length of time has passed.
If necessary, repeat steps (1. ~ 2.) to see the Timer Menu.
3.
Press the Cursor UP/DOWN buttons
E
/
F
to select “Off
timer status”. The red point mark indicates the selected item.
4.
Press the Cursor LEFT/RIGHT buttons
C
/
I
to select the desired
period 05 (180 minutes).
To cancel the OFF-Timer, select
To cancel the OFF-Timer, select
.
5.
Press the MENU button
● to close the OFF -TIMER Menu.
Note: The off timer data will be cancelled if you turn off the TV by the
Stand-by button ( æ TV) on the remote control or with the Main power
button (®) on the TV set.
Stand-by button ( æ TV) on the remote control or with the Main power
button (®) on the TV set.
MAIN Menu
TIMER Menu
TIMER Menu
Click on the first or last page to see other 56FW-53H (serv.man24) service manuals if exist.