DV-740 (serv.man21) - Sharp DVD User Guide / Operation Manual

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

- 1 - 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 1.6 A fuse. 
Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked     or     and of the 
same rating as above, which is also indicated on the pin face of the plug, must be used. 
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. 
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut-off 
the mains plug and fit an appropriate type. 
DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately 
 

and disposed of in a safe manner. 

Under no circumstances should the cut-off plug be inserted elsewhere into a 13 A socket 
outlet, as a serious electric shock may occur. 

To fit an appropriate plug to the mains lead, follow the instruction below: 
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: 

As the colours of the wires in the mains lead of this product may not correspond with the coloured 
markings identifying the terminals in your plug, proceed as follows: 
? The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured 

black. 

? The wire which is coloured brown must be connected to the plug terminal which is marked L or  

coloured red. 

Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. 
Before replacing the plug cover make sure that: 
? If the new fitted plug contains a fuse, Its value is the same as that removed from the cut-off plug. 
? The cord grip is clamped over the sheath of the mains lead and not simply over the lead wires. 
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN. 

 

- 2 - 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

To avoid any malfunctions of the unit, and to protect against 
electric shock, fire or personal injury, please observe the 
following, 

l

 

Hold the plug firmly when connecting or disconnecting 

the AC power lead. 

l

 

Keep the AC power lead away from heating 

appliances. 

l

 

Never put any heavy object on the AC power lead. 

l

 

Do not attempt to repair or reconstruct the AC power 

lead in any way. 

l

 

This player is classified as a CLASS 1 LASER product. 

l

 

The CLASS 1 LASER PRODUCT is located on the rear 

cover. 

l

 

This product contains a low power laser device. To 

ensure continued safety do not remove any cover or 
attempt to gain access  to the inside of the product. 
Refer all servicing to qualified personnel. 

 
 
 
 
 
 
 
 
 
 
 
 

(Rear of product) 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

Note:  
This unit can be used only where the power supply is 
AC 220V-240V, 50/60Hz. It cannot be used 
elsewhere.