51GT-25 (serv.man2). - Part 1 - Text (1-11) - Sharp TV Service Manual (repair manual). Page 3

•Power Input .......................220V-240 Volts AC 50Hz

•Power Consumption

•Audio Power Output Rating .....................4W (MPO)
Speaker..........................16

Ω

 4W, 10cm Round, 1pc

Normal Operation....................................52W
Stand-by Operation.................................7.0W

•White Level

Set  the brightness control, with no signal connected, so that  the CRT cathode current is 600mA.  The maximum
correction applied to each cathode current to achieve a screen temperature of 8950 degrees K-20 MPCD should
not exceed 15% of its original value.

The chassis in this receiver is partially live, always use an isolation transformer when
servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer
servicing to qualified service personnel.

Convergence.........................Self Converging System
Focus....................................Bi-Potencial Electrostatic
Sweep Deflection...........................................Magnetic

Specifictions are subject to change without prior notice.

•Aerial Input Impedance

VHF/UHF...........................75 ohm Unbalanced

•Tuning Ranges ............471.25MHz thru 855.25 MHz

     (CH21-CH69)

•Picture Intermediate Frecuency.....

.........38.9MHz

•Sound  Carrier Trap

.............................32.9MHz

•Adjacent  Sound Carrier Trap

................40.9MHz

•Adjacent  Picture  Carrier Trap

...............30.9MHz