Read Sharp XV-Z7000 (serv.man21) User Guide / Operation Manual online
11
Setup & Connections
Connecting the Projector
Connecting the Power Cord
Plug the supplied power cord into the AC socket on the back of the projector.
Power cord
1 Connect one end of the S-video cable to the S-VIDEO
INPUT terminal, or one end of the video cable to the
VIDEO INPUT terminal on the projector and the video
output terminal on the video source.
VIDEO INPUT terminal on the projector and the video
output terminal on the video source.
2 To use the built-in audio system, connect the RCA
connectors to the corresponding AUDIO INPUT (S-
VIDEO, VIDEO INPUT) terminals on the projector and
the audio output terminals on the audiovisual source.
VIDEO, VIDEO INPUT) terminals on the projector and
the audio output terminals on the audiovisual source.
The S-VIDEO INPUT terminal uses a video signal system
in which the picture is separated into a colour and a
luminance signal to realise a higher-quality image.
in which the picture is separated into a colour and a
luminance signal to realise a higher-quality image.
• For higher quality video, you may use the S-VIDEO INPUT terminal on
the projector. S-video cable is sold separately.
• If your video equipment does not have an S-video output terminal, use
the composite video output terminal.
Connecting the Projector to Audiovisual Equipment
You can connect your projector to a VCR, laser disc player, DVD player, DTV decoder* and other audiovisual
equipment.
equipment.
CAUTION
• Always turn off the projector while connecting to audiovisual equipment, in order to protect both the projector and the
equipment being connected.
Connecting a video source (VCR, laser disc player, DTV decoder or DVD player) using the standard video and audio input
VIDEO
INPUT
INPUT
S-VIDEO
INPUT
INPUT
AUDIO INPUT
(S-VIDEO, VIDEO INPUT)
L
R
1 Video cable (sold separately)
2 Audio cable (sold separately)
To audio output terminals
To video output terminal
To S-video output terminal
1 S-video cable (sold separately)
Projector
VCR,
Laser disc player,
DTV decoder or
DVD player
OR
CAUTION
• Make sure you connect the power cord firmly into the AC socket.
OR
• The configuration of wall outlets differs from country to country. Use the power cord that corresponds to the wall outlet in your country.
* DTV is the umbrella term used to describe the new digital television system in the united
states.
Click on the first or last page to see other XV-Z7000 (serv.man21) service manuals if exist.