XV-Z7000 (serv.man21). Complete (part1 part2) - Sharp Projector User Guide / Operation Manual. Page 13

When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or Mac-
intosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information.

When connecting this projector to a computer, select “RGB” by using RGB/COMPONENT on the remote control or the GUI
menu. (See page 25.)

• Connecting computers other than the recommended types may result in damage to the projector, the computer, or both.

• This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible

computer will communicate their setting requirements, allowing for quick and easy setup.

• Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.

• The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible computer.

RS-232C

INPUT 1

INPUT 2

/COMPONENT

AUDIO INPUT

RGB /COMPONENT

C

R

C

B

Y

(INPUT 1, 2)

You can connect your projector to a computer for projection of full color computer images.

1 Connect one end of the computer RGB cable to the

INPUT 2 RGB/COMPONENT port on the projector.
Secure the connector by tightening the thumb screws.

2 Connect the other end to the Monitor output port on the

computer. Secure the connector by tightening the thumb
screws.

3 To use the built-in audio system, connect one end of

the computer audio cable to the AUDIO INPUT (INPUT
1, 2) terminal on the projector.

4 Connect the other end to the Audio output terminal on

the computer.

• Before connecting, be sure to turn both the projector and the

computer off. After making all connections, turn the projector
on first. The computer should always be turned on last.

• Please read the computer’s operation manual carefully.
• Refer to page 45 “Computer Compatibility Chart” for a list of computer

signals compatible with the projector. Use with computer signals other
than those listed may cause some of the functions not to work.

• A Macintosh adaptor may be required for use with some Macintosh

computers. Contact your nearest Sharp Authorised LCD Projector Dealer
or Service Centre.

When connecting this projector to a computer, select “RGB”
by using RGB/COMPONENT on the remote control or the
GUI menu. (See page 25.)

For Europe only

Computer RGB cable