Read Sharp XV-Z200E (serv.man32) User Guide / Operation Manual online
Connecting to Compo-
nent Video Equipment
Using a 3 RCA to 15-pin
D-sub Cable and the
DVI to 15-pin D-sub
Adaptor (INPUT 2)
nent Video Equipment
Using a 3 RCA to 15-pin
D-sub Cable and the
DVI to 15-pin D-sub
Adaptor (INPUT 2)
Use a 3 RCA to 15-pin D-sub cable and the
DVI to 15-pin D-sub adaptor when connecting
component video equipment such as DVD
players and DTV decoders to INPUT 2 termi-
nal.
DVI to 15-pin D-sub adaptor when connecting
component video equipment such as DVD
players and DTV decoders to INPUT 2 termi-
nal.
1
Connect a DVI to 15-pin D-sub
adaptor to the projector.
adaptor to the projector.
2
Connect a 3 RCA to 15-pin D-
sub cable to the above adaptor.
sub cable to the above adaptor.
• Secure the connectors by tightening the
thumbscrews.
3
Connect the above cable to the
video equipment.
video equipment.
Note
• When connecting this projector to com-
ponent output terminal of the DTV de-
coder, select “Component” for “Signal
Type” on the OSD menu or press
coder, select “Component” for “Signal
Type” on the OSD menu or press
on
the remote control. (See page 52.)
• Make sure to turn both the projector and
the video equipment off before connect-
ing.
ing.
3 RCA to 15-pin
D-sub cable
Type: AN-C3CP
(3.0 m)
D-sub cable
Type: AN-C3CP
(3.0 m)
DVI to 15-pin
D-sub adaptor
Type: AN-A1DV
(20 cm)
D-sub adaptor
Type: AN-A1DV
(20 cm)
Optional
accessories
accessories
To analog component
output terminal
To INPUT 2 terminal
DVD player or
DTV decoder
DTV decoder
DVI to 15-pin
D-sub adaptor
(sold separately)
D-sub adaptor
(sold separately)
3 RCA to 15-pin
D-sub cable
(sold separately)
D-sub cable
(sold separately)
Connecting the Projector to Other Devices
-18
XV_Z200E_E_p13_24.p65
03.10.30, 13:13PM
18
Click on the first or last page to see other XV-Z200E (serv.man32) service manuals if exist.