XV-Z12000 (serv.man32). Cover, contents, introduction - Sharp Projector User Guide / Operation Manual. Page 13

PUSH!

Terminals for 

component and RGB 

signals

.

Terminal for DVI 

digital, computer 

RGB and component 

signals.

Terminals for 

component and 

RGB signals

.

Terminal for 
connecting video 
equipment with an 
S-video terminal.

For connecting 
video equipment.

The terminal cover can be attached 
after removing the rubber cap.

For controlling 
projector using a 
computer.

This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security Sys-
tem. Refer to the information that came with the system for instructions on how to use it to secure the projector.

Using the Terminal Cover
When the projector is used on a desktop, high mounted or
ceiling mounted, attach the terminal cover (supplied) to hide
the connecting cables.
Attaching the Terminal Cover
1 Align the hook on the terminal cover with the insert hole

in the hook at the back of the projector.

2 Press the hook in the direction indicated with the arrow to

fasten the terminal cover to the projector.

3 Insert the terminal cover into the mounting groove on the

projector while pushing the tabs inside the terminal cover
to the outside with your fingers.

Removing the rubber cap attached on the pro-
jector and attach the clips.

XV_Z12000E_E_p05_14.p65

03.10.27, 10:40 AM

11