DSC-T100 (serv.man4) - Sony Digital Camera Service Manual (repair manual)

Model
DSC-T100 (serv.man4)
Pages
44
Size
988.56 KB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / SECTION 6 ADJUSTMENTS
File
dsc-t100-sm4.pdf
Date

View Sony DSC-T100 (serv.man4) Service Manual online

SECTION 6
ADJUSTMENTS
Revision History
Revision History
Sony EMCS Co.
Auto-ADJ
Ver. 1.3  2007.05
9-852-191-51
2007E0500-1
© 2007.5
Published by Kohda TEC
DSC-T100
DSC-T100_ADJ
Link
Link
List of service tools
Adjusting items when replacing main parts and boards
Before starting adjustments
VIDEO SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
DESTINATION DATA WRITE
USB SERIAL No. INPUT
ADJUSTMENT PROGRAM
LCD SYSTEM ADJUSTMENTS
ERROR
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
APPLICATION FOR ADJUSTMENT (SeusEX)
SERVICE MODE
DATA BACKUP
SERVICE MODE
• Use this Service Manual together with the Automatic Adjustment Program (DSC-T100 Auto-Adj Ver_1.3r04.exe).
— 2 —
DSC-T100_ADJ
TABLE OF CONTENTS
Section
Title
Page
6.
ADJUSTMENTS
Before Starting Adjustments ····················································· 6-1
1-1.
Adjusting Items When Replacing
Main Parts and Boards ···················································· 6-3
1-2.
List of Service Tools ························································ 6-4
6-1.
Camera Section Adjustments ··········································· 6-6
1-1.
Preparations Before Adjustments ···································· 6-6
1-2.
Adjustment Program ······················································ 6-13
1-3.
Destination Data Write ·················································· 6-15
1-4.
USB Serial No. Input ····················································· 6-16
1-5.
Video System Adjustments ············································ 6-17
1-6.
Camera System Adjustments ········································· 6-20
1-7.
LCD System Adjustments ············································· 6-31
1-8.
Error ··············································································· 6-33
6-2.
Service Mode ································································· 6-35
2-1.
Application for Adjustment (SeusEX) ·························· 6-35
2-2.
Service Mode ································································· 6-36
2-3.
Data Backup ·································································· 6-41
6-1
DSC-T100_ADJ
Method for Copying or Erasing the Data in Internal Memory
(Internal Memory/Music)
The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the
internal memory.)
Note 1: When replacing the SY-171 board, erase the data in internal memory of the board before replacement.
Note 2: When replacing the SY-171 board, execute formatting and initialize the internal memory after replace-
ment.
Method for copying the data in internal memory
Method for formatting the internal memory
SECTION  6
ADJUSTMENTS
Before starting adjustments
Copies all images in the internal memory to a “Memory Stick Duo”.
1
Insert a 
Memory Stick Duo
 having 32MB or larger capacity.
2
Select [Copy] with v/V/b/B on the control button, then press z.
The message 
All data in internal memory will be copied
 appears.
3
Select [OK] with v, then press z.
Copying starts. 
To cancel the copying
Select [Cancel] in step 3, then press z.
• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little 
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the 
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in 
[
 Internal Memory Tool].
• When you copy the data in the internal memory to the “Memory Stick Duo”, all the data will be copied. 
You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be 
copied.
• Even if you copy data, a DPOF (Print order) mark is not copied.
Copy
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1
Select [Format] with v/V/b/B on the control button, then press z.
The message “All data in internal memory will be erased” appears.
2
Select [OK] with v, then press z.
The format is complete.
To cancel the formatting
Select [Cancel] in step 2, then press z.
Format
6-2
DSC-T100_ADJ
How to Write Data to Internal Memory
Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the
board replacement.
To change the setting, use the write enable tool “WriteEnableTool.exe”.
Data writing method
1) Connect the PC to the camera (USB mode: Mass Storage), and switch the driver to the “Sony Seus USB Driver”.
2) Start the Write Enable Tool and the SeusEX.
3) Click the [Activate Write Enable Mode] button of the Write Enable Tool.
4) Upon completion of the setting change, the following message will be displayed.
5) Return the driver to the original one, and connect the PC to the camera (USB mode: Mass Storage).
6) Write the data read out into the PC to the internal memory of the camera.
7) Disconnect the PC from the camera, and turn off the camera.
Note: By turning off the camera, the write enable setting is reset.
6-3
DSC-T100_ADJ
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z  in the following table.
Note 1:
The automatic Adjustment Program does not support the “Wide Limit Adjustment”. Perform it manually.
Note 2:
When replacing the SY-171 board, erase the data in internal memory of the board before replacement.
Note 3:
When replacing the SY-171 board, execute formatting and initialize the internal memory after replacement.
Table 6-1-1
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
(AF illumination LED)
(Timing gen., CCD signal process)
(Video amp.)
(PITCH, YAW sensor)
LCD901
D002
IC304
IC602
SE502, SE501
(COMPLETE)
(COMPLETE) (Note 2, 3)
Lens block
CCD block assy (Including CD-696 flexible board and CCD imager)
Flash unit
LCD block
ST-162 board
SY-171 board
SY-171 board
SY-171 board
ST-162 board
SY-171 board
Destination Data Write
Destination data write
z
USB Serial No. Input
USB serial No. input
z
Composite video level adj.
z
z
Component out Y level adj.
Component out Pb level adj.
Component out Pr level adj.
CAMERA adjustment 1
Hall adj.
z
z
(Note 1)
Wide limit adj.
z
z
CAMERA adjustment 2
Flange back adj.
z
z
z
CAMERA adjustment 3
Flange back check
z
z
z
F No. compensation
Measure gain adj.
Light value adj.
Mechanical shutter adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 5
Strobe adj.
z
z
z
z
z
CAMERA adjustment 6
Auto focus illumination check
z
z
z
CAMERA adjustment 7
Angular velocity sensor sensitivity adj.
z
z
z
V-COM adj.
White Balance adj.
z
CAMERA adjustment 4
z
z
z
VIDEO adjustment
z
z
z
z
LCD adjustment
6-4
DSC-T100_ADJ
Personal computer
(Note 1)
J-1
J-11
J-10
J-8
HASP key and application 
for adjustment (SeusEX)
Contact our service headquater of each area 
how to get the application for adjustment 
(SeusEX) and HASP key.
J-2
Pattern box PTB-450
J-6082-200-A
 or
Small pattern box
PTB-1450
J-6082-557-A
J-5
Clear chart
For PTB-450:
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-7
Minipattern box
J-6082-353-B
Siemens star chart
J-6080-875-A
Back ground paper
J-2501-130-A
9 colors chart (Note 2)
For PTB-1450:
J-6082-562-A
J-6
USB, A/V, DC IN cable 
for multi-use terminal
1-830-848-21
J-3
J-9
Flange back
adjustment jig
J-6082-563-A
AC power adaptor
AC-LS5
1-479-284-51
J-12
USB cable
1-829-868-41
J-4
360 mm
155 mm
280 mm
woody boad A
woody boad A
9 colors chart
135 mm
Fig. 6-1-1
Note 1:
Personal computer
OS:
Windows98/98SE/Me/2000/XP Home/XP Pro
RAM: 256 MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Note 2:
In using the 9 colors chart on the pattern box PTB-450, adjust the chart size through the procedure shown below so that it matches
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
1-2. List of service tools
 Oscilloscope
 Color monitor
6-5
DSC-T100_ADJ
HD Station (CSS-HD1)
(Note 3)
A-1242-190-A
J-15
J-13
Tripod Adaptor
J-6082-577-A
J-14
Camera table
J-6082-384-A
Fig. 6-1-2
Note 3:
The HD Station must be modified. (Refer to “4. HD Station Modifying Procedure”)
6-6
DSC-T100_ADJ
Fig. 6-1-4
Note:
The set must be connected to the modified HD station when performing the “Component out (Y, Pb, Pr) level adjustment” in the
“Video System Adjustment”.
6-1. CAMERA  SECTION  ADJUSTMENTS
1-1.
PREPARATIONS  BEFORE  ADJUSTMENTS
1-1-1.
Preparations
1) Connect the equipment for adjustments according to Fig. 6-1-4.
2) Start up the application for adjustment (SeusEX).
Fig. 6-1-3
Pattern box
Front of the lens
L = About 11 cm
L
Camera
PC 
(The SeusEX must be installed in the PC.)
OS: Windows 98/98SE/Me/2000/XP
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
         Two connectors are required.
Audio
(Black)
Video
(yellow)
Color monitor
Video system Adjustment
(Composite video level adj.)
Osilloscope
Terminated
75 
AC IN
AC power adaptor
AC-LS5
(1-479-284-51)
USB, A/V, DC IN cable
for multi-use terminal
(1-830-848-21)
HASP Key
 To DC IN jack
To USB 
connector
DISP SEL switch setting
TV:   Video/Camera 
        System Adjustment
CAMERA:   LCD 
                   System Adjustment
To Multi connector
Connecting the Equipment
6-7
DSC-T100_ADJ
Fig. 6-1-5
Note:
For the USB connection, refer to “4. HD Station Modifying Procedure”.
P
b
P
r
Y
PC
OS: Windows 98/98SE/Me/2000/XP
RAM: 256MB or more recommended
USB: 2.0 recommended 
         (also compatible with 1.1)
         Two connectors are required.
AC IN
AC power adaptor
USB cable
(1-829-868-41)
USB connector
HASP Key
 To DC IN jack
To USB 
 connector
To USB 
connector
Terminated
75 
Pr (Red)
Pb (Blue)
Y (Green)
(COMPONENT OUT)
Measurement Point (Component out (Y, Pb, Pr) level adj.)
To COMPONENT OUT
Connection diagram when “Component out (Y, Pb, Pr) level adjustment in “Video System Adjustment” is performed.
6-8
DSC-T100_ADJ
1-1-2.
Precautions
1.
Setting the Switch
Unless otherwise specified, set the switches as follows and perform adjustments.
1. HOME button (Shooting) ............................................ Auto Adjustment
2. ZOOM button ............................................................... WIDE end
3. Digital Zoom
(Setting - Shooting Settings - Shooting Settings 1) .... Off
Fig. 6-1-6
9 colors chart (Standard picture frame)
Adjust the camera position and direction
to obtain the LCD screen or the monitor
TV display shown in Fig. a.
Transparent window
A
B
A
C
B
C
C14: Filter for AWB 5800K adjustment
A
2
Effective picture frame
C14
Blue
Magenta
Red
White
Cyan
Green
Yellow
W14
Fig. a
LCD screen or under scan
monitor TV picture
A = B
C =
3
B
(                                    )
2.
Subjects
1) 9 colors chart (Standard picture frame).
When performing adjustments using the 9 colors chart, adjust
the picture frame as shown in Fig. 6-1-6. (Standard picture
frame)
2) Clear chart (Standard picture frame)
Remove the 9 colors chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations dur-
ing this time)

Download Sony DSC-T100 (serv.man4) Service Manual (Repair Manual)

Here you can view online and download Sony DSC-T100 (serv.man4) Service Manual in PDF. DSC-T100 (serv.man4) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSC-T100 (serv.man4) Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.