Read Sharp XV-Z12000 (serv.man32) User Guide / Operation Manual online
Introduction
-9
In this page, connection of the projector and the video equipment is explained as an example
for the procedure from setup to projection. Refer to each page for details.
for the procedure from setup to projection. Refer to each page for details.
Quick Guide
Required equipments
Composite video cable
(commercially available)
Projector
Remote control
•
Insert the batteries.
(Page 13)
Power cord
1. Place the projector facing a wall or a screen.
2. Connect to video equipment. (Page 17)
6. Turn the projector on using
on the remote
control. (Page 34)
3. Connect the output terminal of the video equip-
ment to the input terminal of the audio equip-
ment using an audio cable.
ment using an audio cable.
4. Plug the power cord into the AC socket of the
projector and into the wall outlet. (Page 16, 34)
5. Remove the lens cap from the lens. (Page 10)
7. Press
on the remote control to select the
INPUT 4 mode. (Page 35)
"On-screen Display
8. Turn on the video equipment.
To INPUT 4
terminal
terminal
To video out-
put terminal
put terminal
INPUT 4 button
ON button
The power indicator
illuminates blue.
illuminates blue.
ON
Adjust the height of
the image by rotating
the lens shift dial.
the image by rotating
the lens shift dial.
Adjust the focus by
rotating the focus ring.
rotating the focus ring.
Adjust the zooming by
moving the zoom knob.
moving the zoom knob.
Power cord
Video equipment
Lens cap
Composite video cable
(commercially available)
(commercially available)
○○○○○○
○○○○○○○
9. Play the video.
10. Adjust the image size, image position and the
focus. (Page 28, 29)
Note
•
This projector can also be connected to a computer
as well as to video equipment. (Page 22)
as well as to video equipment. (Page 22)
XV_Z12000E_E_p05_14.p65
03.10.27, 10:40 AM
9
Click on the first or last page to see other XV-Z12000 (serv.man32) service manuals if exist.