XV-Z10E. Version 1.4 - Sharp Projector Handy Guide. Page 14

Read Sharp XV-Z10E Handy Guide online

Maintenance Procedure
Version 1.4
Issue 04/2006
14
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Cleaning the projector
• 
 Be sure to unplug the power cord before cleaning the projector.
• 
The cabinet as well as the operation panel is made of plastic. Avoid using benzene or
thinner, as these can damage the finish on the cabinet.
• 
Do not use volatile agents such as insecticides on the
projector.
Do not attach rubber or plastic items on the projector for long
time.
The effects of some of the agents in the plastic may cause
damage to the quality or finish of the projector.
 
• 
 Wipe off dirt gently with a soft flannel cloth.
 
• 
When the dirt is hard to remove, soak a cloth in a
neutral detergent diluted with water, wring the cloth
well and then wipe the projector.
Strong cleaning detergents may discolour, warp or
damage the coating on the projector.
Make sure to test on a small, inconspicuous area
on the projector before using.
 Cleaning the lens
• 
Use a commercially available blower or lens cleaning paper (for
glasses and camera lenses) for cleaning the lens. Do not use
any liquid type-cleaning agents, as they may wear off the
coating film on the surface of the lens.
 
• 
As the surface of the lens can easily get damaged, be sure not
to scrape or hit the lens.
Cleaning the exhaust and intake vents
• 
Use a vacuum cleaner to clean dust from the exhaust vent
and the intake vent. 
Page of 47
Display

Click on the first or last page to see other XV-Z10E service manuals if exist.