Read Sharp XV-Z10E Handy Guide online
Lamp Replacement Procedure
Version 1.4
Issue 04/2006
Issue 04/2006
13
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1.
Connect the power cord.
•
Plug the power cord into the AC socket
of the projector.
of the projector.
2.
Reset the lamp timer.
•
To reset the lamp, press “ON”, “INPUT”,
“UNDO”, “VOLUME –“, “ENTER” and
“VOLUME +” on the projector in order,
and then press “ON” on the projector.
“UNDO”, “VOLUME –“, “ENTER” and
“VOLUME +” on the projector in order,
and then press “ON” on the projector.
•
“LAMP 0000H” is displayed, indicating
that the lamp timer is reset.
that the lamp timer is reset.
Note
•
Make sure to reset the lamp timer only
when replacing the lamp. If you reset the
lamp timer and continue to use the same
lamp, this may cause the lamp to
become damaged or explode.
when replacing the lamp. If you reset the
lamp timer and continue to use the same
lamp, this may cause the lamp to
become damaged or explode.
Click on the first or last page to see other XV-Z10E service manuals if exist.