Read Sharp XV-Z10E Handy Guide online
Lamp Replacement Procedure
Version 1.4
Issue 04/2006
Issue 04/2006
12
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
4.
Remove the filter/lamp unit cover.
•
Turn the projector over. Loosen the user service
screw (1) that secures the filter/ lamp unit cover.
Pressing the tab (2), remove the filter/lamp unit
cover (3).
screw (1) that secures the filter/ lamp unit cover.
Pressing the tab (2), remove the filter/lamp unit
cover (3).
5.
Remove the lamp unit.
•
Loosen the securing screws from the
lamp unit. Hold the lamp unit by the
handle and pull it in the direction of the
arrow.
lamp unit. Hold the lamp unit by the
handle and pull it in the direction of the
arrow.
6.
Insert the new lamp unit.
•
Press the lamp unit firmly into the lamp
unit compartment. Fasten the securing
screws.
unit compartment. Fasten the securing
screws.
7.
Replace the filter/lamp unit
cover.
cover.
•
Align the tab on the filter/lamp unit
cover (1) and place it while pressing the
tab (2) to close it. Then tighten the user
service screw (3) to secure the filter/
lamp unit cover.
cover (1) and place it while pressing the
tab (2) to close it. Then tighten the user
service screw (3) to secure the filter/
lamp unit cover.
Note
•
If the lamp unit and filter/lamp unit cover are not correctly installed, the power will not turn
on, even if the power cord is connected to the projector.
on, even if the power cord is connected to the projector.
Click on the first or last page to see other XV-Z10E service manuals if exist.