XG-V10XE (serv.man28). - Basic Operation - Sharp Projector User Guide / Operation Manual. Page 14

This function allows you to turn on or off the on-screen
messages that appear during input select.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options (1)”.

3 Press  ∂/ƒ to select “OSD Display”, and then

press ©.

4 Press  ∂/ƒ to select the desired On-screen

Display.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

1, 6

5

2, 3, 4

1, 6

5

2, 3, 4

The video input system mode is preset to “Auto”;
however, it can be changed to a specific system mode
if the selected system mode is not compatible with the
connected audiovisual equipment.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options (1)”.

3 Press  ∂/ƒ to select “Video System”, and then

press ©.

4 Press  ∂/ƒ to select the desired video system

mode.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

• When the system mode is set to “Auto”, you may not receive

a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.

• AUTO cannot be set for PAL-M and PAL-N input signals.

Select “PAL-M” or “PAL-N” in “Video System” menu for PAL-
M and PAL-N input signals.

All On-screen Display are displayed.

INPUT, CUSTOM, FREEZE, ENLARGE, AUTO SYNC,
VOLUME, MUTE, BLACK SCREEN are not displayed.

All On-screen Display are not displayed (except MENU,
TOOLS, LENS and warning display (Power off, Temp.,
Lamp etc.)).