XG-V10XE (serv.man28). - Basic Operation - Sharp Projector User Guide / Operation Manual. Page 9

Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode
in  “Special Modes” on the “Fine Sync” menu screen
may need to be selected to match the computer display
mode.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Fine Sync”.

3 Press ∂/ƒ to select “Special Modes”, and then

press ©.

4 Press ∂/ƒ to select the optimal resolution mode.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

• Avoid displaying computer patterns which repeat every

other line (horizontal stripes). (Flickering may occur, making
the image hard to see.)

• When inputting DTV 480P or 1080i signals, select the

corresponding type of signal in step 4 above.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Fine Sync”.

3 Press ∂/ƒ to select “Signal Info” to display the

current input signal.

4 To exit from the GUI, press MENU.

This function allows you to check the current input signal
information.

1, 6

5

2, 3, 4

1, 4

2, 3