XG-V10XE (serv.man28). - Basic Operation - Sharp Projector User Guide / Operation Manual. Page 12

Picture in Picture function allows you to display two
pictures on the same screen. You can display the image
input from INPUT 4 or 5 as an inset picture overlapping
the main picture input from INPUT 1, 2 or 3.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options (1)”.

3 Press ∂/ƒ to select “

”.

4 Press ß/© to select “ ” to display an inset picture

(Factory preset to INPUT 4).

• The image from INPUT 1, 2 or 3 is displayed as the main

picture and the image from INPUT 4 or 5 is displayed as
the inset picture.

• The last displayed image from INPUT 4 or 5 is displayed as

the inset picture.
For example, when you want to display the image from
INPUT 5 as the inset picture, select INPUT 5, then select
the main picture, and then select “Pict in Pict”.

5 Press ß/©/∂/ƒ to move the inset picture to one

of four preset positions.

6 To exit from the GUI, press MENU.

• Inset picture can only be displayed in composite signal of

NTSC/PAL/SECAM.

• When selecting the image for the inset picture, only the

images being input will be displayed.

• The audio of the insert picture will come out of the projector’s

speakers.

• Picture in Picture does not work in case of the following

RGB signals.

UXGA signal image
Interlaced signal
DTV (480P/720P/1080i)

• You can only use the following functions while in Picture in

Picture mode.

FREEZE: Works for the inset picture only.
TOOLS: Works with Picture in Picture, but the cursor is

used for TOOLS. The inset picture cannot be
moved.

1, 6

2, 3
4, 5

2

4

0

1996

1997

1998

1999

50

100

C

150

B

200

A

250

300