XG-V10XE (serv.man26). - Setup Connections - Sharp Projector User Guide / Operation Manual. Page 8

Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.
Move the projector forward or backward if the edges of the image are distorted.

• The projector lens should be centred in the middle of the screen. If the lens centre is not perpendicular to the screen, the image will be

distorted, making viewing difficult.

• Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out colours, making viewing

difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

• A polarizing screen cannot be used with this projector.

Six optional lenses from Sharp are also available for specialised application. Please see your local Sharp Authorised
LCD Projector Dealer for details on all the lenses. (Refer to the lens operation manual when attaching a lens.)
Be sure to have service personnel install optional lenses.

AN-LV80EZ

8.0–11.3 m

Throw distance ratio 3.8–5.3:1

AN-LV55EZ

5.5–7.8 m

Throw distance ratio 2.6–3.7:1

AN-LV36EZ

3.6–5.8 m

Throw distance ratio 1.7–2.7:1

AN-LV40EZ

4.1–5.3 m

Throw distance ratio 1.9–2.5:1

AN-LV26EZ

2.6–3.0 m

Throw distance ratio 1.2–1.4:1

AN-LV18MX

1.8 m

Throw distance ratio 0.9:1

Place the projector at the required distance from the screen according
to the desired picture size. (See pages 22–27.)

• Six optional lenses from Sharp are available for specialised application.

Please see your local Sharp Authorised LCD Projector Dealer for details
on all the lenses.

H

L

X

 : Screen size and Picture size (4:3)

 : Screen size and Picture size (16:9)
 : Signal mask area

e.g. Screen size: 254 cm (100 inches)

Computer Input: 4:3

4

16

9

3

4

3