XG-PH50X. Version 1.1 - Sharp Projector Handy Guide. Page 13

Read Sharp XG-PH50X Handy Guide online

Lamp Replacement Procedure
Version 1.1
Issue 04/2006
13
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1. 
Connect the power cord.
• 
Plug the power cord into the AC socket of the
projector.
 
2. 
Reset the lamp timer.
LAMP 1 (AN-PH50LP1)
• 
While pressing simultaneously “H&V LENS SHIFT”
and “ENTER” on the projector, press “ON” on the
projector.
• 
“LAMP1 100%” is displayed, indicating that the
lamp timer is reset.
LAMP 2 (AN-PH50LP2)
• 
While pressing simultaneously “MENU” and
“ENTER” on the projector, press “ON” on the
projector.
• 
“LAMP2 100%” is displayed, indicating that the
lamp timer is reset.
Note
• 
Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and
continue to use the same lamp, this may cause the lamp to become damaged or explode.
Page of 57
Display

Click on the first or last page to see other XG-PH50X service manuals if exist.