Read Sharp XG-PH50X Handy Guide online
Lamp Replacement Procedure
Version 1.1
Issue 04/2006
Issue 04/2006
12
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
3.
Remove the lamp unit cover.
•
Loosen the user service screw that secures the lamp
unit cover. Then open the cover in the direction of the
arrow.
unit cover. Then open the cover in the direction of the
arrow.
4.
Remove the lamp unit.
•
Loosen the securing screws from the
lamp unit. Hold the lamp unit by the
handle and pull it in the direction of
the arrow.
lamp unit. Hold the lamp unit by the
handle and pull it in the direction of
the arrow.
5.
Insert the new lamp unit.
•
Press the lamp unit firmly into the
lamp unit compartment. Fasten the
securing screws.
lamp unit compartment. Fasten the
securing screws.
7.
Attach the lamp unit cover.
•
Insert the tab of the lamp unit cover
into the opening, and press the cover
until it clicks in place.
into the opening, and press the cover
until it clicks in place.
Note
•
If the lamp unit and lamp cover is not correctly installed, the power will not turn on, even if
the power cord is connected to the projector.
the power cord is connected to the projector.
Click on the first or last page to see other XG-PH50X service manuals if exist.