Read Sharp XG-P20XE Handy Guide online
Maintenance Procedure
Version 1.4
Issue 04/2006
Issue 04/2006
15
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Replacing the Air Filter
•
This projector is equipped with air filters to ensure the optimal
operating condition of the projector.
operating condition of the projector.
•
The air filters should be cleaned every 100 hours of use. Clean the
filters more often when the projector is used in a dusty or smoky
location.
filters more often when the projector is used in a dusty or smoky
location.
•
Ask your nearest Sharp Authorised
Projector Dealer or Se
Projector Dealer or Se
rvice Centre to
exchange the filter (PFILD0080CEZZ)
when it is no longer possible to clean.
when it is no longer possible to clean.
1.
Turn off the power and disconnect the power cord.
•
Press “OFF”. Wait until the cooling fan stops.
2.
Remove the bottom filter cover.
•
Turn over the projector. Grab the tab and open the filter cover
in the direction of the arrow.
in the direction of the arrow.
3.
Remove the air filter.
•
Pick the air filter up with your fingers and lift it out of the filter cover.
Click on the first or last page to see other XG-P20XE service manuals if exist.