XG-P20XE. Version 1.4 - Sharp Projector Handy Guide. Page 18

Read Sharp XG-P20XE Handy Guide online

Options
Version 1.4
Issue 04/2006
18
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Setting up the Screen
Position the projector perpendicular to the screen with all feet flat and level to achieve an
optimal image.
Note
• 
The projector lens should be centred in the middle of the screen. If the horizontal line
passing through the lens centre is not perpendicular to the screen, the image will be
distorted, making viewing difficult.
• 
For optimal image, position the screen so that it is not in direct sunlight or room light.
Light falling directly on the screen washes out the colours, making viewing difficult. Close
the curtains and dim the lights when setting up the screen in a sunny or bright room.
• 
A polarising screen cannot be used with this projector.
Two optional lenses from Sharp are also available for specialised application. Please see your local Sharp
Authorised LCD Projector Dealer to details on all the lenses. (Refer to the lens operation manual when
attaching a lens.) Also, be sure to have service personnel install the AN-P9MX and AN-P48EZ optional lenses.
Throw Distance
• 
The graph below is for 100 inches (254 cm) screen with 4:3 normal mode.
Standard Set-up (Front Projection)
• 
Place the projector at the required distance from the
screen according to the desired picture size.
Page of 56
Display

Click on the first or last page to see other XG-P20XE service manuals if exist.